Eminence BETA 10CX-8
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 48 Hz |
| Qts | 0.397 |
| Qes | 0.43 |
| Qms | 5.21 |
| Vas | 64.2 L |
| Sd | 344.9 cm² |
| Xmax | 5 mm |
| Re | 5.53 Ω |
| Bl | 10.5 T·m |
| Mms | 28.6 g |
| Pe | 250 W |
| Sensitivity | 95.8 dB |
Alignment hint
| EBP | 112 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 29.6 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence BETA 10CX | 49 +1 | 0.397 = | 64.2 = | 5 = | 96 +0.2 | close | + | |
| Eminence BETA 10CX | 49 +1 | 0.38 -0.02 | 61.1 -3.1 | 5 = | 94.3 -1.5 | close | + | |
| Beyma 10CX300/FE | 48 = | 0.38 -0.02 | 62.7 -1.5 | 6.75 +1.75 | 94.1 -1.7 | close | + | |
| Beyma 10CX25 | 53 +5 | 0.366 -0.03 | 66 +1.8 | 5 = | 97.1 +1.3 | close | + | |
| Faital PRO 10FE300 | 50 +2 | 0.39 -0.01 | 49 -15.2 | 5.47 +0.47 | 94 -1.8 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 10PR320 | 50 +2 | 0.38 -0.02 | 50.6 -13.6 | 7.27 +2.27 | 95 -0.8 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Eminence LEGEND B102 | 48 = | 0.389 -0.01 | 65 +0.8 | 3 -2 | 95 -0.8 | close | Xmax 3 mm < 5 mm: lower excursion-limited SPL | + |
| Dayton Audio PA255-8 | 46.4 -1.6 | 0.484 +0.09 | 59 -5.2 | 5 = | 94.6 -1.2 | close | + | |
| Eminence BETA10 | 53 +5 | 0.489 +0.09 | 60.1 -4.1 | 5 = | 95.8 = | close | + | |
| Ground Zero GZCK 250SPL | 45.4 -2.6 | 0.36 -0.04 | 67.9 +3.7 | 12 +7 | 94.1 -1.7 | usable | 4 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the BETA 10CX-8 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.