Eminence 5378
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 16 Ω |
| Fs | 42 Hz |
| Qts | 0.403 |
| Qes | 0.44 |
| Qms | 4.73 |
| Vas | 243.5 L |
| Sd | 856.3 cm² |
| Xmax | 3.2 mm |
| Re | 8 Ω |
| Bl | 17.1 T·m |
| Mms | 60.6 g |
| Pe | 150 W |
| Sensitivity | 98.1 dB |
Alignment hint
| EBP | 95 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 117.1 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence DELTA PRO 15 | 42 = | 0.403 = | 243.5 = | 4.3 +1.1 | 99.6 +1.5 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Eminence DELTA PRO 15 A | 42 = | 0.403 = | 243.5 = | 4.3 +1.1 | 99.6 +1.5 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Eminence DELTA PRO 15A | 42 = | 0.4 = | 243.5 = | 4.3 +1.1 | 101.6 +3.5 | close | 8 Ω vs 16 Ω: amp load changes | + |
| RCF CX15G251 | 41 -1 | 0.389 -0.01 | 219 -24.5 | 3.7 +0.5 | 99.5 +1.4 | close | 8 Ω vs 16 Ω: amp load changes · 100 W vs 150 W: lower power handling | + |
| DAS Audio 15P | 40 -2 | 0.422 +0.02 | 233 -10.5 | 6 +2.8 | 98.2 +0.1 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Visaton BGS 40 v2 | 40 -2 | 0.424 +0.02 | 263 +19.5 | 5.7 +2.5 | 98.2 +0.1 | close | 8 Ω vs 16 Ω: amp load changes | + |
| JBL MI-15A | 40 -2 | 0.421 +0.02 | 271.8 +28.3 | 4 +0.8 | 99.2 +1.1 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Audax PR38XT150 | 43.6 +1.6 | 0.421 +0.02 | 200 -43.5 | 3.5 +0.3 | 98.9 +0.8 | close | 8 Ω vs 16 Ω: amp load changes | + |
| DAS Audio 15L | 38 -4 | 0.418 +0.01 | 263 +19.5 | 6 +2.8 | 98.1 = | close | 8 Ω vs 16 Ω: amp load changes | + |
| SICA 15 BP 3 SL | 41.9 -0.1 | 0.419 +0.02 | 191.6 -51.9 | 4 +0.8 | 98.7 +0.6 | close | 8 Ω vs 16 Ω: amp load changes | + |
Compare the closest 3 against the 5378 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.