Eminence OMEGA PRO-15A
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 33 Hz |
| Qts | 0.32 |
| Qes | 0.33 |
| Qms | 5.69 |
| Vas | 258.5 L |
| Sd | 856.3 cm² |
| Xmax | 4.8 mm |
| Re | 5.28 Ω |
| Bl | 17.5 T·m |
| Mms | 94 g |
| Pe | 800 W |
| Sensitivity | 97.3 dB |
Alignment hint
| EBP | 100 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 66.6 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence OMEGA PRO 15 A | 33 = | 0.312 -0.01 | 258.5 = | 4.8 = | 98.3 +1 | close | + | |
| Eminence OMEGA 15 A | 33 = | 0.312 -0.01 | 258 -0.5 | 4.8 = | 98.3 +1 | close | + | |
| Faital PRO 15PR400 vp | 32.8 -0.2 | 0.332 +0.01 | 263.2 +4.7 | 5.8 +1 | 98 +0.7 | close | 400 W vs 800 W: lower power handling | + |
| Beyma 15LW30 v2015 | 34 +1 | 0.325 +0.01 | 251 -7.5 | 7 +2.2 | 97.6 +0.3 | close | 500 W vs 800 W: lower power handling | + |
| Supravox 400 GMF PRO MK2 | 35 +2 | 0.32 = | 247 -11.5 | 5.8 +1 | 97.9 +0.6 | close | 200 W vs 800 W: lower power handling | + |
| Faital PRO 15PR400 | 35 +2 | 0.32 = | 248.9 -9.6 | 5.75 +0.95 | 99 +1.7 | close | 400 W vs 800 W: lower power handling | + |
| Beyma 15 XT | 33 = | 0.289 -0.03 | 270 +11.5 | 5 +0.2 | 98 +0.7 | close | 200 W vs 800 W: lower power handling | + |
| Faital PRO 15PR400 v2021 | 35 +2 | 0.322 = | 248.9 -9.6 | 5.8 +1 | 98.9 +1.6 | close | 400 W vs 800 W: lower power handling | + |
| Fostex W 200 | 32 -1 | 0.35 +0.03 | 268.7 +10.2 | 5.2 +0.4 | 96.6 -0.7 | close | 150 W vs 800 W: lower power handling | + |
| Monacor SP-15A/402PA | 36 +3 | 0.316 = | 235 -23.5 | 5 +0.2 | 98.1 +0.8 | close | 400 W vs 800 W: lower power handling | + |
Compare the closest 3 against the OMEGA PRO-15A →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.