Eminence KappaLITE 3012HO
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 52 Hz |
| Qts | 0.32 |
| Qes | 0.33 |
| Qms | 8.39 |
| Vas | 81.1 L |
| Sd | 532.4 cm² |
| Xmax | 6.2 mm |
| Re | 5.5 Ω |
| Bl | 15.9 T·m |
| Mms | 47 g |
| Pe | 400 W |
| Sensitivity | 100.5 dB |
Alignment hint
| EBP | 158 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 20.9 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence KAPPALITE 3012 H0 | 51.5 -0.5 | 0.318 = | 81.1 = | 5.8 -0.4 | 98.9 -1.6 | close | Xmax 5.8 mm < 6.2 mm: lower excursion-limited SPL | + |
| 18 Sound 12MB606 | 50 -2 | 0.323 = | 84 +2.9 | 6.4 +0.2 | 98.3 -2.2 | close | + | |
| Eminence DELTA PRO 12 A | 51 -1 | 0.353 +0.03 | 81.7 +0.6 | 6.2 = | 98.1 -2.4 | close | + | |
| Eminence DELTA PRO 12 A vp | 51 -1 | 0.353 +0.03 | 81.7 +0.6 | 6.2 = | 98.1 -2.4 | close | + | |
| 18 Sound 12ND710 | 53 +1 | 0.29 -0.03 | 85 +3.9 | 5 -1.2 | 101 +0.5 | close | 16 Ω vs 8 Ω: amp load changes · Xmax 5 mm < 6.2 mm: lower excursion-limited SPL | + |
| JBL 1400 PRO | 52 = | 0.314 -0.01 | 62.3 -18.8 | 7.6 +1.4 | 99 -1.5 | close | + | |
| RCF MB 12N251 | 50 -2 | 0.338 +0.02 | 83 +1.9 | 5 -1.2 | 98.5 -2 | close | 300 W vs 400 W: lower power handling · Xmax 5 mm < 6.2 mm: lower excursion-limited SPL | + |
| Eminence DELTA PRO 12A | 51 -1 | 0.35 +0.03 | 81.7 +0.6 | 4.6 -1.6 | 99.2 -1.3 | close | Xmax 4.6 mm < 6.2 mm: lower excursion-limited SPL | + |
| Faital PRO 12FH520 | 50 -2 | 0.29 -0.03 | 73.7 -7.4 | 7.25 +1.05 | 98 -2.5 | close | + | |
| JBL 2206H | 52 = | 0.316 = | 62.3 -18.8 | 5.9 -0.3 | 97.9 -2.6 | close | Xmax 5.9 mm < 6.2 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the KappaLITE 3012HO →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.