Eminence Kappa Pro-15A
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 47 Hz |
| Qts | 0.38 |
| Qes | 0.4 |
| Qms | 8.01 |
| Vas | 167.7 L |
| Sd | 856.3 cm² |
| Xmax | 3.2 mm |
| Re | 5.23 Ω |
| Bl | 16.6 T·m |
| Mms | 72 g |
| Pe | 500 W |
| Sensitivity | 101 dB |
Alignment hint
| EBP | 118 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 68.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence KAPPA PRO 15 | 47 = | 0.381 = | 167.7 = | 6.4 +3.2 | 100.2 -0.8 | close | + | |
| Eminence KAPPA PRO 15 A | 47 = | 0.381 = | 167.7 = | 6.4 +3.2 | 100.2 -0.8 | close | + | |
| Peavey 1505-8 DT | 46.5 -0.5 | 0.389 +0.01 | 164.3 -3.4 | 5.1 +1.9 | 99.5 -1.5 | close | 350 W vs 500 W: lower power handling | + |
| Peavey 1505-8BW | 46.5 -0.5 | 0.389 +0.01 | 164.3 -3.4 | 5.1 +1.9 | 99.5 -1.5 | close | 350 W vs 500 W: lower power handling | + |
| P.Audio SN-15MB | 47 = | 0.329 -0.05 | 176.8 +9.1 | 3.3 +0.1 | 101.1 +0.1 | close | 200 W vs 500 W: lower power handling | + |
| Beyma 15BBB | 42 -5 | 0.38 = | 176 +8.3 | 3.3 +0.1 | 99.2 -1.8 | close | 150 W vs 500 W: lower power handling | + |
| Peavey 1505-4 DT v1993 | 44.6 -2.4 | 0.373 -0.01 | 182 +14.3 | 5.1 +1.9 | 102.1 +1.1 | close | 4 Ω vs 8 Ω: amp load changes · 350 W vs 500 W: lower power handling | + |
| JBL 2033H | 50 +3 | 0.417 +0.04 | 170 +2.3 | 4.9 +1.7 | 100.7 -0.3 | close | 300 W vs 500 W: lower power handling | + |
| Eminence 15-3008PS | 47.9 +0.9 | 0.379 = | 203.6 +35.9 | 5.5 +2.3 | 100.2 -0.8 | close | + | |
| the box 15LB075-UW4 | 40 -7 | 0.382 = | 158.9 -8.8 | 4 +0.8 | 99.5 -1.5 | close | 4 Ω vs 8 Ω: amp load changes · 300 W vs 500 W: lower power handling | + |
Compare the closest 3 against the Kappa Pro-15A →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.