Eminence Kappa Pro-10LF
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 39 Hz |
| Qts | 0.28 |
| Qes | 0.29 |
| Qms | 8.97 |
| Vas | 72.97 L |
| Sd | 376.9 cm² |
| Xmax | 7.2 mm |
| Re | 5.47 Ω |
| Bl | 14.46 T·m |
| Mms | 46 g |
| Pe | 600 W |
| Sensitivity | 91.6 dB |
Alignment hint
| EBP | 134 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 13.6 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence KAPPA PRO 10 LF | 39 = | 0.281 = | 73 +0.03 | 7.2 = | 95.4 +3.8 | close | + | |
| AE Speakers TD10X | 35 -4 | 0.27 -0.01 | 67.5 -5.47 | 7 -0.2 | 92.4 +0.8 | close | Xmax 7 mm < 7.2 mm: lower excursion-limited SPL | + |
| Eminence KAPPALITE 3010 LF | 38.7 -0.3 | 0.273 -0.01 | 62.4 -10.57 | 8.5 +1.3 | 93.5 +1.9 | close | + | |
| Visaton TIW250XS 8 Ohms | 31 -8 | 0.298 +0.02 | 73 +0.03 | 8.1 +0.9 | 91.8 +0.2 | close | 200 W vs 600 W: lower power handling | + |
| Ciare CW250C | 39 = | 0.27 -0.01 | 77 +4.03 | 5 -2.2 | 93.3 +1.7 | close | 4 Ω vs 8 Ω: amp load changes · 250 W vs 600 W: lower power handling · Xmax 5 mm < 7.2 mm: lower excursion-limited SPL | + |
| Beyma 10WRS300 | 41 +2 | 0.276 = | 66.5 -6.47 | 5.8 -1.4 | 95.1 +3.5 | usable | 300 W vs 600 W: lower power handling · Xmax 5.8 mm < 7.2 mm: lower excursion-limited SPL | + |
| Faital PRO 10RS430 v2025 | 32 -7 | 0.282 = | 59.2 -13.77 | 9.2 +2 | 90.9 -0.7 | usable | 400 W vs 600 W: lower power handling | + |
| Visaton TIW250XS 8 Ohms v2 | 33 -6 | 0.328 +0.05 | 66 -6.97 | 7.9 +0.7 | 91.8 +0.2 | usable | 200 W vs 600 W: lower power handling | + |
| Faital PRO 10RS430 | 32 -7 | 0.28 = | 59.2 -13.77 | 13.57 +6.37 | 91 -0.6 | usable | 400 W vs 600 W: lower power handling | + |
| STX W.27.400.8.MC | 31 -8 | 0.329 +0.05 | 79 +6.03 | 7.6 +0.4 | 91.6 = | usable | 200 W vs 600 W: lower power handling | + |
Compare the closest 3 against the Kappa Pro-10LF →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.