Eminence KAPPA-15A
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 33 Hz |
| Qts | 0.32 |
| Qes | 0.33 |
| Qms | 8.9 |
| Vas | 321.3 L |
| Sd | 856.3 cm² |
| Xmax | 4 mm |
| Re | 5.22 Ω |
| Bl | 15.7 T·m |
| Mms | 76 g |
| Pe | 450 W |
| Sensitivity | 100.5 dB |
Alignment hint
| EBP | 100 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 82.7 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence KAPPA 15 A | 33 = | 0.318 = | 321.3 = | 5.5 +1.5 | 99.3 -1.2 | close | + | |
| AE Speakers TD15M 4 Ohms | 34.7 +1.7 | 0.327 +0.01 | 312 -9.3 | 6 +2 | 102.1 +1.6 | close | 4 Ω vs 8 Ω: amp load changes · 250 W vs 450 W: lower power handling | + |
| Audax PR38EX66UST | 33 = | 0.344 +0.02 | 309 -12.3 | 4 = | 97.9 -2.6 | close | 150 W vs 450 W: lower power handling | + |
| Eminence LEGEND CB15 | 34 +1 | 0.339 +0.02 | 336 +14.7 | 4.8 +0.8 | 98.8 -1.7 | close | 300 W vs 450 W: lower power handling | + |
| AE Speakers TD15M | 34.7 +1.7 | 0.327 +0.01 | 312 -9.3 | 6 +2 | 98.5 -2 | close | 250 W vs 450 W: lower power handling | + |
| AE Speakers TD15M 8 Ohms | 34.7 +1.7 | 0.327 +0.01 | 312 -9.3 | 6 +2 | 98.5 -2 | close | 250 W vs 450 W: lower power handling | + |
| Beyma 15G350 | 34 +1 | 0.293 -0.03 | 302 -19.3 | 4.5 +0.5 | 99 -1.5 | close | 250 W vs 450 W: lower power handling | + |
| Sonido SCW-400 | 34 +1 | 0.339 +0.02 | 357 +35.7 | 5 +1 | 98.6 -1.9 | close | 125 W vs 450 W: lower power handling | + |
| Sphynx SP-W15-SONO | 38 +5 | 0.331 +0.01 | 376 +54.7 | 4 = | 100.9 +0.4 | close | 150 W vs 450 W: lower power handling | + |
| Beyma SM115 vp4 | 35.5 +2.5 | 0.339 +0.02 | 310.6 -10.7 | 7.3 +3.3 | 99 -1.5 | close | + |
Compare the closest 3 against the KAPPA-15A →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.