Eminence DELTA 10B
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 16 Ω |
| Fs | 65 Hz |
| Qts | 0.33 |
| Qes | 0.35 |
| Qms | 8.34 |
| Vas | 36 L |
| Sd | 344.9 cm² |
| Xmax | 3.5 mm |
| Re | 11.6 Ω |
| Bl | 19.5 T·m |
| Mms | 28 g |
| Pe | 350 W |
| Sensitivity | 98 dB |
Alignment hint
| EBP | 186 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 10 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence DELTA 10 B | 65 = | 0.336 +0.01 | 36 = | 3.5 = | 94.9 -3.1 | close | + | |
| Eminence DELTA 10 | 66 +1 | 0.332 = | 30.5 -5.5 | 3.5 = | 97.7 -0.3 | close | 8 Ω vs 16 Ω: amp load changes | + |
| Eminence DELTA 10 A | 66 +1 | 0.332 = | 30.5 -5.5 | 3.5 = | 97.7 -0.3 | close | 8 Ω vs 16 Ω: amp load changes | + |
| DLS DLS 1021 | 61 -4 | 0.312 -0.02 | 35.5 -0.5 | 4 +0.5 | 97.4 -0.6 | close | 8 Ω vs 16 Ω: amp load changes · 250 W vs 350 W: lower power handling | + |
| Oberton 10NMB200 | 58.67 -6.33 | 0.316 -0.01 | 34.93 -1.07 | 4.25 +0.75 | 98 = | close | 8 Ω vs 16 Ω: amp load changes · 200 W vs 350 W: lower power handling | + |
| 18 Sound 10NMB420 | 65 = | 0.33 = | 30 -6 | 4 +0.5 | 99 +1 | close | + | |
| RCF MB 10N251 (prodance) | 58.9 -6.1 | 0.33 = | 38.8 +2.8 | 4.8 +1.3 | 97.3 -0.7 | close | 8 Ω vs 16 Ω: amp load changes | + |
| PHL Audio 3020 | 60 -5 | 0.337 +0.01 | 41 +5 | 4.1 +0.6 | 97.6 -0.4 | close | 8 Ω vs 16 Ω: amp load changes · 200 W vs 350 W: lower power handling | + |
| Faital PRO 10PR310 | 60 -5 | 0.34 +0.01 | 32.2 -3.8 | 4.92 +1.42 | 98 = | close | 8 Ω vs 16 Ω: amp load changes | + |
| Eminence BETA 10 | 66 +1 | 0.332 = | 30.5 -5.5 | 3 -0.5 | 97.7 -0.3 | close | 8 Ω vs 16 Ω: amp load changes · 250 W vs 350 W: lower power handling · Xmax 3 mm < 3.5 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the DELTA 10B →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.