Electro-Voice EVX-155
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 35.4 Hz |
| Qts | 0.212 |
| Qes | 0.22 |
| Qms | 5.56 |
| Vas | 220 L |
| Sd | 790 cm² |
| Xmax | 6.4 mm |
| Re | 5 Ω |
| Bl | 20.2 T·m |
| Mms | 80.4 g |
| Pe | 600 W |
| Sensitivity | 100.5 dB |
Alignment hint
| EBP | 161 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 21.7 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 15P80/ND | 35 -0.4 | 0.214 = | 217 -3 | 7.9 +1.5 | 100.1 -0.4 | close | + | |
| DAS Audio 15GN | 36 +0.6 | 0.213 = | 197 -23 | 6 -0.4 | 99.2 -1.3 | close | Xmax 6 mm < 6.4 mm: lower excursion-limited SPL | + |
| B&C 15NDL76 | 37 +1.6 | 0.22 +0.01 | 195 -25 | 7 +0.6 | 99.5 -1 | close | + | |
| 18 Sound 15ND930 | 36 +0.6 | 0.22 +0.01 | 206 -14 | 7.5 +1.1 | 98 -2.5 | close | + | |
| PD PD 153ER v2018 | 40 +4.6 | 0.215 = | 218.8 -1.2 | 5.4 -1 | 101.4 +0.9 | close | 400 W vs 600 W: lower power handling · Xmax 5.4 mm < 6.4 mm: lower excursion-limited SPL | + |
| Precision Devices PD 153ER v2018 | 40 +4.6 | 0.215 = | 218.8 -1.2 | 5.4 -1 | 101.4 +0.9 | close | 400 W vs 600 W: lower power handling · Xmax 5.4 mm < 6.4 mm: lower excursion-limited SPL | + |
| B&C 15 NDL 76 | 37 +1.6 | 0.228 +0.02 | 195 -25 | 6 -0.4 | 99.9 -0.6 | close | Xmax 6 mm < 6.4 mm: lower excursion-limited SPL | + |
| Beyma 15"P80Nd | 39 +3.6 | 0.21 = | 184 -36 | 7.5 +1.1 | 101 +0.5 | close | + | |
| MC Kenzie C15.400BS | 40 +4.6 | 0.219 +0.01 | 215 -5 | 5.4 -1 | 101 +0.5 | close | 400 W vs 600 W: lower power handling · Xmax 5.4 mm < 6.4 mm: lower excursion-limited SPL | + |
| RCF L 15/554K | 35 -0.4 | 0.243 +0.03 | 227 +7 | 8 +1.6 | 98.7 -1.8 | close | + |
Compare the closest 3 against the EVX-155 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.