← all drivers

Electro-Voice EVM-10M

10" · 8 Ω · 200 W · 101.8 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance8 Ω
Fs65 Hz
Qts0.17
Qes0.175
Qms5.8
Vas40 L
Sd314 cm²
Xmax2.8 mm
Re5.2 Ω
Bl15.9 T·m
Mms20.7 g
Pe200 W
Sensitivity101.8 dB

Alignment hint

EBP371 · ported
Sealed Vb (Qtc ≈ 0.71)≈ 2.5 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Electro-Voice DL10X60 -50.152 -0.0244 +43.1 +0.3101 -0.8close+
B&C 10 PE 2660 -50.184 +0.0137 -32.4 -0.499.7 -2.1usableXmax 2.4 mm < 2.8 mm: lower excursion-limited SPL+
18 Sound 10NMBA52060 -50.23 +0.0642 +24 +1.2100.5 -1.3usable+
DAS Audio 10B59 -60.186 +0.0228 -123.4 +0.698.4 -3.4usable+
JBL 2012H61 -40.209 +0.0431 -93.8 +199.3 -2.5usable+
PHL Audio 386075 +100.172 =25 -152 -0.8102.1 +0.3usableXmax 2 mm < 2.8 mm: lower excursion-limited SPL+
PHL Audio 384062 -30.21 +0.0428 -123.1 +0.398.3 -3.5usable+
PHL Audio 382054 -110.183 +0.0128 -123.6 +0.897.7 -4.1usable+
PHL Audio 382154 -110.183 +0.0128 -123.6 +0.897.7 -4.1usable+
18 Sound 10NMB42056 -90.25 +0.0840 =4 +1.299 -2.8usable+

Compare the closest 3 against the EVM-10M →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.