Electro-Voice DL18X
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 30 Hz |
| Qts | 0.339 |
| Qes | 0.37 |
| Qms | 4 |
| Vas | 566.3 L |
| Sd | 1142 cm² |
| Xmax | 4.1 mm |
| Re | 6 Ω |
| Bl | 16.7 T·m |
| Mms | 90.9 g |
| Pe | 400 W |
| Sensitivity | 99.4 dB |
Alignment hint
| EBP | 81 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 169 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Fostex L 569 | 30 = | 0.28 -0.06 | 560 -6.3 | 4 -0.1 | 99.7 +0.3 | close | 150 W vs 400 W: lower power handling · Xmax 4 mm < 4.1 mm: lower excursion-limited SPL | + |
| Celestion G18-200 | 29.6 -0.4 | 0.364 +0.02 | 518.5 -47.8 | 5 +0.9 | 97.9 -1.5 | close | 200 W vs 400 W: lower power handling | + |
| Eminence KAPPA 18 | 28 -2 | 0.32 -0.02 | 493.2 -73.1 | 4.8 +0.7 | 98.9 -0.5 | close | + | |
| Eminence JAY7010 | 28.1 -1.9 | 0.314 -0.03 | 546.6 -19.7 | 9.1 +5 | 99.2 -0.2 | close | + | |
| MCM Electronics 55-2964 | 27 -3 | 0.313 -0.03 | 630.6 +64.3 | 6 +1.9 | 98.1 -1.3 | close | 300 W vs 400 W: lower power handling | + |
| Eminence OMEGA PRO 18 A | 25 -5 | 0.308 -0.03 | 548.7 -17.6 | 4.8 +0.7 | 98.1 -1.3 | close | + | |
| Eminence DELTA PRO 18 (Prodance) | 26.6 -3.4 | 0.301 -0.04 | 533.6 -32.7 | 6.7 +2.6 | 98.8 -0.6 | close | + | |
| Eminence OMEGA PRO 18 (Prodance) | 24.2 -5.8 | 0.316 -0.02 | 581.5 +15.2 | 4.8 +0.7 | 97.8 -1.6 | usable | + | |
| Faital PRO 18FH500 | 30 = | 0.35 +0.01 | 417.9 -148.4 | 9.25 +5.15 | 99 -0.4 | usable | + | |
| Fane 18-500 TLHP | 29 -1 | 0.403 +0.06 | 521 -45.3 | 6.3 +2.2 | 98.2 -1.2 | usable | + |
Compare the closest 3 against the DL18X →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.