Electro-Voice DL10X

10" · 8 Ω · 300 W · 101 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	60 Hz
Qts	0.152
Qes	0.16
Qms	3.21
Vas	44 L
Sd	370 cm²
Xmax	3.1 mm
Re	6 Ω
Bl	20.8 T·m
Mms	30.7 g
Pe	300 W
Sensitivity	101 dB

Alignment hint

EBP	375 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 2.1 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Electro-Voice EVM-10M	65 +5	0.17 +0.02	40 -4	2.8 -0.3	101.8 +0.8	close	200 W vs 300 W: lower power handling · Xmax 2.8 mm < 3.1 mm: lower excursion-limited SPL	+
B&C 10 PE 26	60 =	0.184 +0.03	37 -7	2.4 -0.7	99.7 -1.3	usable	Xmax 2.4 mm < 3.1 mm: lower excursion-limited SPL	+
18 Sound 10NMBA520	60 =	0.23 +0.08	42 -2	4 +0.9	100.5 -0.5	usable		+
David Eden EC1060XL4	46.1 -13.9	0.157 +0.01	67.7 +23.7	3.3 +0.2	102.3 +1.3	usable	4 Ω vs 8 Ω: amp load changes · 150 W vs 300 W: lower power handling	+
DAS Audio 10B	59 -1	0.186 +0.03	28 -16	3.4 +0.3	98.4 -2.6	usable		+
JBL 2012H	61 +1	0.209 +0.06	31 -13	3.8 +0.7	99.3 -1.7	usable		+
Dayton Audio APOLLO 10N	54 -6	0.222 +0.07	43.5 -0.5	4.3 +1.2	97.1 -3.9	usable		+
Eminence KAPPALITE 3010 MB	50.7 -9.3	0.204 +0.05	52.1 +8.1	5 +1.9	99.1 -1.9	usable		+
PHL Audio 3820	54 -6	0.183 +0.03	28 -16	3.6 +0.5	97.7 -3.3	usable		+
PHL Audio 3821	54 -6	0.183 +0.03	28 -16	3.6 +0.5	97.7 -3.3	usable		+

Compare the closest 3 against the DL10X →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.