Elder Audio 10LB075-U
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 56.8 Hz |
| Qts | 0.38 |
| Qes | 0.4 |
| Qms | 7.56 |
| Vas | 33.3 L |
| Sd | 354 cm² |
| Xmax | 2 mm |
| Re | 5.8 Ω |
| Bl | 14.6 T·m |
| Mms | 41.4 g |
| Pe | 250 W |
| Sensitivity | 95.2 dB |
Alignment hint
| EBP | 142 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 13.5 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| the box Speaker 10-250/8-A | 56.8 = | 0.38 = | 33.3 = | 4 +2 | 95.2 = | close | + | |
| Monacor SP-10/100PA | 65 +8.2 | 0.381 = | 32 -1.3 | 2.5 +0.5 | 95.8 +0.6 | close | 100 W vs 250 W: lower power handling | + |
| B&C 10 CL 51 v2024 | 58 +1.2 | 0.375 -0.01 | 36 +2.7 | 3.9 +1.9 | 96.1 +0.9 | close | 150 W vs 250 W: lower power handling | + |
| Monacor SP-10A/300PA | 55 -1.8 | 0.357 -0.02 | 34 +0.7 | 3.8 +1.8 | 94.6 -0.6 | close | + | |
| B&C 10 CL 51 | 60 +3.2 | 0.394 +0.01 | 31 -2.3 | 3.7 +1.7 | 95.7 +0.5 | close | 150 W vs 250 W: lower power handling | + |
| B&C 10CL51 | 58 +1.2 | 0.38 = | 36 +2.7 | 5.5 +3.5 | 96 +0.8 | close | 150 W vs 250 W: lower power handling | + |
| the box 10LB065-16N | 65 +8.2 | 0.379 = | 36.8 +3.5 | 2.5 +0.5 | 94.4 -0.8 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Ciare PFXI10.50W | 58 +1.2 | 0.374 -0.01 | 38.5 +5.2 | 4.4 +2.4 | 96 +0.8 | close | + | |
| Faital PRO 10FE400 | 60 +3.2 | 0.41 +0.03 | 33.6 +0.3 | 5.62 +3.62 | 95 -0.2 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Sica 10 Fe 2.5 CP | 57 +0.2 | 0.37 -0.01 | 39.7 +6.4 | 4 +2 | 96.3 +1.1 | close | + |
Compare the closest 3 against the 10LB075-U →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.