DLS W610
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 32.9 Hz |
| Qts | 0.216 |
| Qes | 0.23 |
| Qms | 3.63 |
| Vas | 40.3 L |
| Sd | 314.6 cm² |
| Xmax | 4.6 mm |
| Re | 3.6 Ω |
| Bl | 16.1 T·m |
| Mms | 80.6 g |
| Pe | 180 W |
| Sensitivity | 93.4 dB |
Alignment hint
| EBP | 143 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 4.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Mivoc AWM 104 | 31 -1.9 | 0.26 +0.04 | 37 -3.3 | 5.2 +0.6 | 92.2 -1.2 | usable | + | |
| Alcone AC 10 SW-4 | 28 -4.9 | 0.231 +0.02 | 48 +7.7 | 5.1 +0.5 | 92.4 -1 | usable | + | |
| Volt BM2500.4 | 32 -0.9 | 0.213 = | 73 +32.7 | 6.6 +2 | 93.3 -0.1 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma 10LW30/N | 38 +5.1 | 0.234 +0.02 | 56 +15.7 | 7 +2.4 | 94.2 +0.8 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| SICA 10 S 3 PL v2017 | 43 +10.1 | 0.265 +0.05 | 39.9 -0.4 | 6.1 +1.5 | 94.5 +1.1 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| PHL Audio 3411 | 47 +14.1 | 0.23 +0.01 | 35.1 -5.2 | 4.9 +0.3 | 95.3 +1.9 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| TAD AL-1103 | 34 +1.1 | 0.27 +0.05 | 53 +12.7 | 4.5 -0.1 | 91 -2.4 | usable | 8 Ω vs 4 Ω: amp load changes · Xmax 4.5 mm < 4.6 mm: lower excursion-limited SPL | + |
| Sica 10 S 3 PL | 43 +10.1 | 0.27 +0.05 | 39.9 -0.4 | 7 +2.4 | 94.5 +1.1 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Faital PRO 10RS430 vp B184423 | 36.3 +3.4 | 0.293 +0.08 | 43 +2.7 | 7 +2.4 | 91 -2.4 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| AE Speakers TD10M-8 | 40.1 +7.2 | 0.238 +0.02 | 59.2 +18.9 | 6 +1.4 | 94.5 +1.1 | usable | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the W610 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.