← all drivers

DLS SP15 - 2x2

15" · 2 Ω · 500 W · 103 dB · datasheet ↗

Thiele-Small parameters

Nominal size15"
Impedance2 Ω
Fs33 Hz
Qts0.323
Qes0.35
Qms4.22
Vas191.7 L
Sd754.8 cm²
Xmax8.7 mm
Re1.25 Ω
Bl8.5 T·m
Mms96.9 g
Pe500 W
Sensitivity103 dB

Alignment hint

EBP94 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 50.5 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
DLS SP15 DLS33.2 +0.20.323 =191.7 =8.6 -0.1103.1 +0.1closeXmax 8.6 mm < 8.7 mm: lower excursion-limited SPL+
JBL 1500 GTI35 +20.339 +0.02189 -2.78.2 -0.5100.6 -2.4close4 Ω vs 2 Ω: amp load changes · Xmax 8.2 mm < 8.7 mm: lower excursion-limited SPL+
Eminence KAPPA PRO 15 LFC37 +40.319 =183.2 -8.57.9 -0.8100.3 -2.7close4 Ω vs 2 Ω: amp load changes · Xmax 7.9 mm < 8.7 mm: lower excursion-limited SPL+
Faital PRO 15FH50035 +20.31 -0.01199.2 +7.59.25 +0.5598 -5close8 Ω vs 2 Ω: amp load changes+
Faital PRO 15FH500 4 Ohms33 =0.28 -0.04209.5 +17.87.7 -1100 -3usable4 Ω vs 2 Ω: amp load changes · Xmax 7.7 mm < 8.7 mm: lower excursion-limited SPL+
Eminence KAPPA PRO 15 LF-235 +20.307 -0.02198.8 +7.18.2 -0.597.1 -5.9usable8 Ω vs 2 Ω: amp load changes · Xmax 8.2 mm < 8.7 mm: lower excursion-limited SPL+
JBL 2226G40 +70.31 -0.01175.6 -16.17 -1.7102.4 -0.6usable4 Ω vs 2 Ω: amp load changes · Xmax 7 mm < 8.7 mm: lower excursion-limited SPL+
JBL 2265 HPL37 +40.325 =176 -15.78 -0.797.9 -5.1usable8 Ω vs 2 Ω: amp load changes · Xmax 8 mm < 8.7 mm: lower excursion-limited SPL+
Eminence KAPPA PRO 15 LF v235 +20.31 -0.01172.5 -19.28.7 =96.8 -6.2usable8 Ω vs 2 Ω: amp load changes+
Monacor SP-15/500FH35 +20.31 -0.01218 +26.37.8 -0.998.6 -4.4usable8 Ω vs 2 Ω: amp load changes · Xmax 7.8 mm < 8.7 mm: lower excursion-limited SPL+

Compare the closest 3 against the SP15 - 2x2 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.