Decware DHM 108B
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 35 Hz |
| Qts | 0.316 |
| Qes | 0.33 |
| Qms | 7.49 |
| Vas | 53 L |
| Sd | 363.2 cm² |
| Xmax | 5.5 mm |
| Re | 6.9 Ω |
| Bl | 18.2 T·m |
| Mms | 72.2 g |
| Pe | 275 W |
| Sensitivity | 91 dB |
Alignment hint
| EBP | 106 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 13.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Focal 11K 7512 | 38 +3 | 0.353 +0.04 | 51.9 -1.1 | 5.3 -0.2 | 91.6 +0.6 | close | 175 W vs 275 W: lower power handling · Xmax 5.3 mm < 5.5 mm: lower excursion-limited SPL | + |
| Sica 10 SR 2.5 CP | 34.5 -0.5 | 0.32 = | 66.7 +13.7 | 6 +0.5 | 93 +2 | close | + | |
| SICA 10 SR 2.5 CP 8 Ohms v2017 | 34.5 -0.5 | 0.323 +0.01 | 66.7 +13.7 | 6 +0.5 | 92.9 +1.9 | close | + | |
| Faital PRO 10RS430 vp B184423 | 36.3 +1.3 | 0.293 -0.02 | 43 -10 | 7 +1.5 | 91 = | close | + | |
| TAD AL-1103 | 34 -1 | 0.27 -0.05 | 53 = | 4.5 -1 | 91 = | close | 150 W vs 275 W: lower power handling · Xmax 4.5 mm < 5.5 mm: lower excursion-limited SPL | + |
| Dayton Audio ST255-8 | 41.1 +6.1 | 0.31 -0.01 | 48.7 -4.3 | 5.5 = | 93.3 +2.3 | close | + | |
| Faital PRO 10RS430 v2026 | 32 -3 | 0.301 -0.02 | 61.5 +8.5 | 9.7 +4.2 | 90.8 -0.2 | close | + | |
| Visaton TIW250XS 8 Ohms v2 | 33 -2 | 0.328 +0.01 | 66 +13 | 7.9 +2.4 | 91.8 +0.8 | close | 200 W vs 275 W: lower power handling | + |
| Soundstream SS-10R | 35 = | 0.375 +0.06 | 51 -2 | 6 +0.5 | 93.7 +2.7 | close | 4 Ω vs 8 Ω: amp load changes · 200 W vs 275 W: lower power handling | + |
| Volt RV2501 | 39 +4 | 0.332 +0.02 | 47 -6 | 5 -0.5 | 92.5 +1.5 | close | Xmax 5 mm < 5.5 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the DHM 108B →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.