Dayton Audio UM10-22 10
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 26.2 Hz |
| Qts | 0.458 |
| Qes | 0.54 |
| Qms | 3.03 |
| Vas | 35.1 L |
| Sd | 327.8 cm² |
| Xmax | 10.9 mm |
| Re | 3 Ω |
| Bl | 12 T·m |
| Mms | 158.4 g |
| Pe | 500 W |
| Sensitivity | 86.9 dB |
Alignment hint
| EBP | 49 · sealed |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 25.4 L |
EBP < 50: favours a sealed (closed) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| JL Audio 10W6V2-D4 | 28.5 +2.3 | 0.469 +0.01 | 33.4 -1.7 | 11.9 +1 | 84.9 -2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| JL Audio 10W1V3-4 | 26.15 -0.05 | 0.446 -0.01 | 43.41 +8.31 | 11 +0.1 | 84.2 -2.7 | close | 300 W vs 500 W: lower power handling | + |
| Infinity REFERENCE 1060W | 29 +2.8 | 0.42 -0.04 | 32.9 -2.2 | 13.0048 +2.1 | 88 +1.1 | close | 275 W vs 500 W: lower power handling | + |
| Dayton Audio RSS265HF-4 v2012 | 26.2 = | 0.441 -0.02 | 45 +9.9 | 9.4 -1.5 | 87.8 +0.9 | close | 350 W vs 500 W: lower power handling · Xmax 9.4 mm < 10.9 mm: lower excursion-limited SPL | + |
| Dayton Audio TS280D-4 | 25.6 -0.6 | 0.404 -0.05 | 33.7 -1.4 | 8.3 -2.6 | 87.1 +0.2 | close | 300 W vs 500 W: lower power handling · Xmax 8.3 mm < 10.9 mm: lower excursion-limited SPL | + |
| Infinity KAPPA PERFECT 10.1 | 28.35 +2.15 | 0.42 -0.04 | 38.511 +3.41 | 14.15 +3.25 | 84.8 -2.1 | close | 350 W vs 500 W: lower power handling | + |
| Infinity 1030W | 29.62 +3.42 | 0.39 -0.07 | 35.72 +0.62 | 12.25 +1.35 | 88 +1.1 | close | 250 W vs 500 W: lower power handling | + |
| JL Audio 10W1V3-2 | 25.23 -0.97 | 0.436 -0.02 | 44.15 +9.05 | 11 +0.1 | 83.9 -3 | usable | 2 Ω vs 4 Ω: amp load changes · 300 W vs 500 W: lower power handling | + |
| Brax BRAX MATRIX ML10 | 35 +8.8 | 0.46 = | 40 +4.9 | 12.5 +1.6 | 87.3 +0.4 | usable | + | |
| JL Audio 10W3V3-4 | 31.5 +5.3 | 0.485 +0.03 | 32.23 -2.87 | 14 +3.1 | 84.87 -2.03 | usable | + |
Compare the closest 3 against the UM10-22 10 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.