← all drivers

Dayton Audio TIT280C-4

10" · 4 Ω · 400 W · 87.8 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance4 Ω
Fs29.6 Hz
Qts0.442
Qes0.47
Qms7.34
Vas28.3 L
Sd330.1 cm²
Xmax8.6 mm
Re3.3 Ω
Bl14.3 T·m
Mms156 g
Pe400 W
Sensitivity87.8 dB

Alignment hint

EBP63 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 18.1 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
JBL GTO 1014D29.7 +0.10.439 =30.2 +1.97.3 -1.387.6 -0.2closeXmax 7.3 mm < 8.6 mm: lower excursion-limited SPL+
JBL GTO 101428.7 -0.90.456 +0.0129.2 +0.97.3 -1.387.8 =closeXmax 7.3 mm < 8.6 mm: lower excursion-limited SPL+
Focal P25F31 +1.40.458 +0.0229 +0.76.9 -1.787.6 -0.2close300 W vs 400 W: lower power handling · Xmax 6.9 mm < 8.6 mm: lower excursion-limited SPL+
Dayton Audio RSS265HO-4427.9 -1.70.484 +0.0428.1 -0.210.2 +1.689.2 +1.4close2 Ω vs 4 Ω: amp load changes+
Infinity REFERENCE 1060W29 -0.60.42 -0.0232.9 +4.613.0048 +4.488 +0.2close275 W vs 400 W: lower power handling+
Infinity KAPPA PERFECT 1028.4 -1.20.419 -0.0232.1 +3.87.1 -1.587.1 -0.7close8 Ω vs 4 Ω: amp load changes · Xmax 7.1 mm < 8.6 mm: lower excursion-limited SPL+
Gladen RS-X 1035.57 +5.970.46 +0.0227.8 -0.510 +1.485.9 -1.9close300 W vs 400 W: lower power handling+
Rockford Fosgate P3D2-1026.6 -30.495 +0.0527 -1.39.4 +0.885.7 -2.1close+
Infinity 1030W29.62 +0.020.39 -0.0535.72 +7.4212.25 +3.6588 +0.2close250 W vs 400 W: lower power handling+
JBL GT4-1029.6 =0.421 -0.0236.1 +7.87.1 -1.588.6 +0.8close250 W vs 400 W: lower power handling · Xmax 7.1 mm < 8.6 mm: lower excursion-limited SPL+

Compare the closest 3 against the TIT280C-4 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.