Dayton Audio SS10-22
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 34 Hz |
| Qts | 0.402 |
| Qes | 0.45 |
| Qms | 3.8 |
| Vas | 20.6 L |
| Sd | 344.5 cm² |
| Xmax | 8 mm |
| Re | 4.4 Ω |
| Bl | 19.2 T·m |
| Mms | 177 g |
| Pe | 700 W |
| Sensitivity | 87.1 dB |
Alignment hint
| EBP | 76 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 9.8 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Gladen SQX 10 | 38.8 +4.8 | 0.39 -0.01 | 24.5 +3.9 | 10 +2 | 87.1 = | close | 4 Ω vs 8 Ω: amp load changes · 350 W vs 700 W: lower power handling | + |
| Dayton Audio RSS265HO-4 | 30.3 -3.7 | 0.367 -0.04 | 22.8 +2.2 | 7.9 -0.1 | 87.7 +0.6 | close | 4 Ω vs 8 Ω: amp load changes · Xmax 7.9 mm < 8 mm: lower excursion-limited SPL | + |
| Polk Audio MM100 | 35 +1 | 0.46 +0.06 | 22.1 +1.5 | 8.7 +0.7 | 84.7 -2.4 | close | 4 Ω vs 8 Ω: amp load changes · 400 W vs 700 W: lower power handling | + |
| hertz Hertz Audio ML2500 | 33 -1 | 0.497 +0.09 | 19 -1.6 | 8 = | 88 +0.9 | close | 4 Ω vs 8 Ω: amp load changes | + |
| TC Sounds OEM 10 DVC vp | 30 -4 | 0.357 -0.05 | 19.3 -1.3 | 6.6 -1.4 | 87.2 +0.1 | usable | 4 Ω vs 8 Ω: amp load changes · 500 W vs 700 W: lower power handling · Xmax 6.6 mm < 8 mm: lower excursion-limited SPL | + |
| hertz Hertz Audio MPS 250 S4 | 29 -5 | 0.476 +0.07 | 21.2 +0.6 | 8.2 +0.2 | 85.8 -1.3 | usable | 4 Ω vs 8 Ω: amp load changes · 500 W vs 700 W: lower power handling | + |
| Hertz Audio HX 250 | 37 +3 | 0.44 +0.04 | 24 +3.4 | 14 +6 | 85.8 -1.3 | usable | 4 Ω vs 8 Ω: amp load changes · 450 W vs 700 W: lower power handling | + |
| American Bass DX 10 | 36.1 +2.1 | 0.486 +0.08 | 20.7 +0.1 | 12 +4 | 84.4 -2.7 | usable | 4 Ω vs 8 Ω: amp load changes · 250 W vs 700 W: lower power handling | + |
| Kicker COMPVX 10 | 35.4 +1.4 | 0.403 = | 23 +2.4 | 5.2 -2.8 | 89.6 +2.5 | usable | 4 Ω vs 8 Ω: amp load changes · 250 W vs 700 W: lower power handling · Xmax 5.2 mm < 8 mm: lower excursion-limited SPL | + |
| Infinity KAPPA 100.9 | 33.8 -0.2 | 0.44 +0.04 | 18.05 -2.55 | 17.5 +9.5 | 83 -4.1 | usable | 4 Ω vs 8 Ω: amp load changes · 350 W vs 700 W: lower power handling | + |
Compare the closest 3 against the SS10-22 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.