Dayton Audio MB1025-8
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 45 Hz |
| Qts | 0.35 |
| Qes | 0.37 |
| Qms | 6.47 |
| Vas | 50.7 L |
| Sd | 346.4 cm² |
| Xmax | 3 mm |
| Re | 5.3 Ω |
| Bl | 13 T·m |
| Mms | 41.5 g |
| Pe | 350 W |
| Sensitivity | 94.7 dB |
Alignment hint
| EBP | 122 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 16.5 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Fane SOVEREIGN PRO 10-300SC | 47 +2 | 0.329 -0.02 | 45.4 -5.3 | 4.8 +1.8 | 95 +0.3 | close | + | |
| Beyma SM110/N | 43 -2 | 0.353 = | 65 +14.3 | 4 +1 | 94.5 -0.2 | close | 200 W vs 350 W: lower power handling | + |
| Beyma 10G40 v2016 | 45 = | 0.306 -0.04 | 49 -1.7 | 6.6 +3.6 | 94.5 -0.2 | close | + | |
| P.Audio E10-200S v2006 | 53 +8 | 0.337 -0.01 | 46.9 -3.8 | 4.1 +1.1 | 95.1 +0.4 | close | 200 W vs 350 W: lower power handling | + |
| Faital PRO 10PR320 | 50 +5 | 0.38 +0.03 | 50.6 -0.1 | 7.27 +4.27 | 95 +0.3 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Beyma 10"G40 | 45 = | 0.3 -0.05 | 49 -1.7 | 7 +4 | 95 +0.3 | close | + | |
| Ciare FXE 10-2.5 | 46 +1 | 0.358 +0.01 | 41.6 -9.1 | 6 +3 | 93.6 -1.1 | close | + | |
| P.Audio HP-10W | 48.43 +3.43 | 0.4 +0.05 | 55.35 +4.65 | 3 = | 93.4 -1.3 | close | 200 W vs 350 W: lower power handling | + |
| Visaton PAW 25/8 | 52 +7 | 0.33 -0.02 | 44 -6.7 | 3.5 +0.5 | 94.4 -0.3 | close | + | |
| Beyma SM110 | 42 -3 | 0.345 -0.01 | 65 +14.3 | 4 +1 | 93.6 -1.1 | close | 200 W vs 350 W: lower power handling | + |
Compare the closest 3 against the MB1025-8 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.