← all drivers

Dayton Audio DSA315-8

12" · 8 Ω · 120 W · 90.4 dB · datasheet ↗

Thiele-Small parameters

Nominal size12"
Impedance8 Ω
Fs24.2 Hz
Qts0.33
Qes0.4
Qms1.89
Vas147 L
Sd506.7 cm²
Xmax5.5 mm
Re6 Ω
Bl15.5 T·m
Mms105.6 g
Pe120 W
Sensitivity90.4 dB

Alignment hint

EBP60 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 40.9 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Dayton Audio DS315-824.2 =0.307 -0.02159.1 +12.15.5 =91 +0.6close+
Eton 12-680-62 HEX26 +1.80.343 +0.01150 +36 +0.591.6 +1.2close+
Dayton Audio SD315A-8824.2 =0.335 +0.01151.7 +4.76.4 +0.993.7 +3.3close4 Ω vs 8 Ω: amp load changes+
HiVi F12 v200926 +1.80.367 +0.04145.6 -1.46 +0.591.1 +0.7close+
Eton 12-212/C8/62 HEX SYMPHONY II24 -0.20.31 -0.02176 +298.5 +390.7 +0.3close+
STX W.32.500.8.MC25 +0.80.299 -0.03155 +87.5 +292.1 +1.7close+
Dayton Audio ST305-8 Séries II26.2 +20.334 =164 +178 +2.592.3 +1.9close+
JBL LE14A28 +3.80.323 -0.01147.3 +0.35.1 -0.492.8 +2.4closeXmax 5.1 mm < 5.5 mm: lower excursion-limited SPL+
HiVi F1225 +0.80.37 +0.04173.9 +26.96 +0.590.7 +0.3close+
JBL CS1224.7 +0.50.388 +0.06144 -36 +0.592.7 +2.3close4 Ω vs 8 Ω: amp load changes+

Compare the closest 3 against the DSA315-8 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.