← all drivers

Dayton Audio DS270-8

10" · 8 Ω · 100 W · 90.2 dB · datasheet ↗

Thiele-Small parameters

Nominal size10"
Impedance8 Ω
Fs30.7 Hz
Qts0.444
Qes0.55
Qms2.31
Vas84.7 L
Sd353 cm²
Xmax5.5 mm
Re5.4 Ω
Bl10.2 T·m
Mms55.4 g
Pe100 W
Sensitivity90.2 dB

Alignment hint

EBP56 · flexible
Sealed Vb (Qtc ≈ 0.71)≈ 55.1 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

DriverFs (Hz)QtsVas (L)Xmax (mm)Sens (dB)FitNotesCompare
Dayton Audio DS270-8 v201831.6 +0.90.441 =87.7 +35.5 =90.8 +0.6close+
SEAS W26FX00231 +0.30.397 -0.0587 +2.36.5 +190.5 +0.3close+
SICA 10 SR 2 PL32.6 +1.90.481 +0.0482.3 -2.46.5 +190.6 +0.4close+
Beyma 10BR60 V2 vp JF bleu32 +1.30.459 +0.0299.9 +15.26.5 +190 -0.2close+
Dayton Audio DSA270-829.6 -1.10.384 -0.0688.1 +3.45.5 =90.6 +0.4close+
STX W.25.200.8.MC32 +1.30.435 -0.0179 -5.74.5 -190.7 +0.5closeXmax 4.5 mm < 5.5 mm: lower excursion-limited SPL+
Sica 10 H 2 CS30.3 -0.40.37 -0.0784.3 -0.46 +0.590.8 +0.6close+
Beyma 10BR60 V2 vp JF rouge30.7 =0.435 -0.01113.7 +296.5 +190.2 =close+
Dayton Audio RS270-8 v201729.6 -1.10.472 +0.0396.5 +11.86 +0.588.8 -1.4close+
Artech SP25/10027 -3.70.425 -0.0286.1 +1.46.5 +188.2 -2close+

Compare the closest 3 against the DS270-8 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.