Dayton Audio DCS255-4
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 37.7 Hz |
| Qts | 0.468 |
| Qes | 0.5 |
| Qms | 7.42 |
| Vas | 32.1 L |
| Sd | 346.4 cm² |
| Xmax | 4.2 mm |
| Re | 3.45 Ω |
| Bl | 12.4 T·m |
| Mms | 93.4 g |
| Pe | 200 W |
| Sensitivity | 91 dB |
Alignment hint
| EBP | 75 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 25 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Auditor 250 P | 38.7 +1 | 0.454 -0.01 | 24.8 -7.3 | 5 +0.8 | 90.3 -0.7 | close | + | |
| LaVoce SSF102.50L V2 | 44 +6.3 | 0.493 +0.02 | 30.7 -1.4 | 7.1 +2.9 | 90.3 -0.7 | close | 8 Ω vs 4 Ω: amp load changes | + |
| hertz Hertz Audio HX250 | 37 -0.7 | 0.444 -0.02 | 24 -8.1 | 5.3 +1.1 | 90.3 -0.7 | close | + | |
| LaVoce SSF102.40 | 41 +3.3 | 0.51 +0.04 | 31.91 -0.19 | 8.3 +4.1 | 89 -2 | close | + | |
| MTX Audio RT10-04 | 32 -5.7 | 0.49 +0.02 | 32.6 +0.5 | 6.7 +2.5 | 89.1 -1.9 | close | + | |
| Kartesian WOM250_VPA | 45 +7.3 | 0.485 +0.02 | 37.7 +5.6 | 4.5 +0.3 | 90.3 -0.7 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Audison AV10 | 41 +3.3 | 0.539 +0.07 | 30.7 -1.4 | 7 +2.8 | 90.4 -0.6 | close | + | |
| Focal 11V 5552 | 40.5 +2.8 | 0.497 +0.03 | 24.1 -8 | 4.6 +0.4 | 90.8 -0.2 | close | + | |
| Clarion PXW1052 | 33.6 -4.1 | 0.505 +0.04 | 30.2 -1.9 | 9.6 +5.4 | 91.4 +0.4 | close | 2 Ω vs 4 Ω: amp load changes | + |
| Aurum Cantus AC250SW | 35 -2.7 | 0.452 -0.02 | 42 +9.9 | 5.9 +1.7 | 90.5 -0.5 | close | + |
Compare the closest 3 against the DCS255-4 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.