Dayton Audio APOLLO 18N
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 8 Ω |
| Fs | 32 Hz |
| Qts | 0.338 |
| Qes | 0.35 |
| Qms | 10.02 |
| Vas | 253.6 L |
| Sd | 1200 cm² |
| Xmax | 9.1 mm |
| Re | 6.1 Ω |
| Bl | 26.3 T·m |
| Mms | 196.9 g |
| Pe | 1200 W |
| Sensitivity | 96.9 dB |
Alignment hint
| EBP | 91 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 75.1 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence DEFINIMAX 4018 LF | 32 = | 0.348 +0.01 | 237.9 -15.7 | 8.6 -0.5 | 96.4 -0.5 | close | Xmax 8.6 mm < 9.1 mm: lower excursion-limited SPL | + |
| Fane COLOSSUS 18-1000 | 32 = | 0.319 -0.02 | 236 -17.6 | 8.9 -0.2 | 97 +0.1 | close | Xmax 8.9 mm < 9.1 mm: lower excursion-limited SPL | + |
| Ciare NDH18_4S | 31 -1 | 0.319 -0.02 | 239 -14.6 | 9.4 +0.3 | 96.5 -0.4 | close | + | |
| Peavey LO MAX 18 | 33.5 +1.5 | 0.318 -0.02 | 249.7 -3.9 | 9.5 +0.4 | 97.7 +0.8 | close | + | |
| BMS 18S430vv2 | 31 -1 | 0.34 = | 262 +8.4 | 8 -1.1 | 96 -0.9 | close | Xmax 8 mm < 9.1 mm: lower excursion-limited SPL | + |
| Beyma 18P1000 | 32 = | 0.362 +0.02 | 245 -8.6 | 8 -1.1 | 96.5 -0.4 | close | Xmax 8 mm < 9.1 mm: lower excursion-limited SPL | + |
| Sica 18 S 4 CP | 33 +1 | 0.35 +0.01 | 225 -28.6 | 11 +1.9 | 97.1 +0.2 | close | + | |
| Fane 18XBN | 33 +1 | 0.337 = | 236 -17.6 | 7.5 -1.6 | 96.8 -0.1 | close | Xmax 7.5 mm < 9.1 mm: lower excursion-limited SPL | + |
| Fane COLOSSUS 18XBN | 33 +1 | 0.337 = | 236 -17.6 | 7.5 -1.6 | 96.8 -0.1 | close | Xmax 7.5 mm < 9.1 mm: lower excursion-limited SPL | + |
| 18 Sound 18LW2400 | 33 +1 | 0.32 -0.02 | 235 -18.6 | 9.5 +0.4 | 98 +1.1 | close | 4 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the APOLLO 18N →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.