Davis 39GCA15 v2024
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 26.3 Hz |
| Qts | 0.333 |
| Qes | 0.349 |
| Qms | 7.29 |
| Vas | 347 L |
| Sd | 892 cm² |
| Xmax | 7.5 mm |
| Re | 4.98 Ω |
| Bl | 16.7 T·m |
| Mms | 118.1 g |
| Pe | 300 W |
| Sensitivity | 96.6 dB |
Alignment hint
| EBP | 75 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 98.9 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Davis 39GPA15 | 26.2 -0.1 | 0.338 +0.01 | 384 +37 | 7.5 = | 97 +0.4 | close | + | |
| JBL 2216ND-1 | 27.6 +1.3 | 0.357 +0.02 | 378.4 +31.4 | 9.5 +2 | 96.8 +0.2 | close | + | |
| Davis 39GCA15 | 23.6 -2.7 | 0.33 = | 402 +55 | 7.5 = | 95.6 -1 | close | + | |
| JBL 2216ND (pour JBL 4367) | 28.3 +2 | 0.376 +0.04 | 333 -14 | 9.5 +2 | 96.3 -0.3 | close | + | |
| TAD TL-1601 B | 28 +1.7 | 0.342 +0.01 | 307 -40 | 6.8 -0.7 | 95.5 -1.1 | close | 200 W vs 300 W: lower power handling · Xmax 6.8 mm < 7.5 mm: lower excursion-limited SPL | + |
| TAD TL-1603 | 28 +1.7 | 0.342 +0.01 | 304 -43 | 6.8 -0.7 | 95.5 -1.1 | close | 200 W vs 300 W: lower power handling · Xmax 6.8 mm < 7.5 mm: lower excursion-limited SPL | + |
| PHL Audio 5510MNds | 30 +3.7 | 0.324 -0.01 | 293 -54 | 8.7 +1.2 | 96.6 = | close | + | |
| Beyma 15k200 | 27 +0.7 | 0.262 -0.07 | 345 -2 | 7.5 = | 97 +0.4 | close | + | |
| Altec 3154 | 25 -1.3 | 0.322 -0.01 | 393.6 +46.6 | 6.4 -1.1 | 95 -1.6 | close | Xmax 6.4 mm < 7.5 mm: lower excursion-limited SPL | + |
| Great Plains Audio 3154 GPA | 25 -1.3 | 0.322 -0.01 | 393.6 +46.6 | 6.4 -1.1 | 95 -1.6 | close | Xmax 6.4 mm < 7.5 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the 39GCA15 v2024 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.