Davis 31TCA12 vp rc1 d
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 8 Ω |
| Fs | 35 Hz |
| Qts | 0.53 |
| Qes | 0.65 |
| Qms | 2.87 |
| Vas | 169.8 L |
| Sd | 530.9 cm² |
| Xmax | 6 mm |
| Re | 6.73 Ω |
| Bl | 10.5 T·m |
| Mms | 48.1 g |
| Pe | 200 W |
| Sensitivity | 93.2 dB |
Alignment hint
| EBP | 54 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 217.7 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence LEGEND BP122 8 Ohms | 35 = | 0.537 +0.01 | 157.4 -12.4 | 6.2 +0.2 | 94.2 +1 | close | + | |
| Celestion PULSE XL 12.20 | 35.1 +0.1 | 0.503 -0.03 | 153.3 -16.5 | 8.3 +2.3 | 94.2 +1 | close | + | |
| Visaton W300 | 32 -3 | 0.549 +0.02 | 190 +20.2 | 7 +1 | 92.2 -1 | close | 150 W vs 200 W: lower power handling | + |
| Philips AD12100/M8 | 36 +1 | 0.464 -0.07 | 193.3 +23.5 | 6.2 +0.2 | 94.6 +1.4 | close | 100 W vs 200 W: lower power handling | + |
| Beyma 12BR70 v2014 | 31 -4 | 0.497 -0.03 | 142 -27.8 | 6 = | 92.3 -0.9 | close | 125 W vs 200 W: lower power handling | + |
| Beyma 12BR70 v2015 | 31 -4 | 0.497 -0.03 | 142 -27.8 | 6 = | 92.3 -0.9 | close | 125 W vs 200 W: lower power handling | + |
| Beyma 12"BR70 | 31 -4 | 0.5 -0.03 | 142 -27.8 | 8 +2 | 93 -0.2 | close | 125 W vs 200 W: lower power handling | + |
| Peerless SLS12 830669 v2012 | 31 -4 | 0.536 +0.01 | 132.4 -37.4 | 6.1 +0.1 | 91.9 -1.3 | close | 100 W vs 200 W: lower power handling | + |
| Infinity KAPPA CS 120 LB | 29 -6 | 0.485 -0.05 | 161.4 -8.4 | 6.7 +0.7 | 94.3 +1.1 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Visaton W300-8 | 32 -3 | 0.449 -0.08 | 190 +20.2 | 7 +1 | 93.4 +0.2 | close | 150 W vs 200 W: lower power handling | + |
Compare the closest 3 against the 31TCA12 vp rc1 d →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.