Davis 28MP10

10" · 8 Ω · 60 W · 87.8 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	40 Hz
Qts	1.42
Qes	2.08
Qms	4.48
Vas	80.1 L
Sd	330 cm²
Xmax	3 mm
Re	5.15 Ω
Bl	4.3 T·m
Mms	30.2 g
Pe	60 W
Sensitivity	87.8 dB

Alignment hint

EBP	19 · sealed
Sealed Vb (Qtc ≈ 0.71)	Qts too high

EBP < 50: favours a sealed (closed) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Boss Audio CX10	36 -4	1.193 -0.23	75.9 -4.2	4 +1	85.9 -1.9	usable	4 Ω vs 8 Ω: amp load changes	+
Visaton WS25 E	34 -6	1.435 +0.02	113 +32.9	3.6 +0.6	85.1 -2.7	usable		+
Visaton WS25 E 8 Ohms	40 =	0.995 -0.42	90 +9.9	4.6 +1.6	89 +1.2	usable		+
Europsonic HPC25/60	33.7 -6.3	1.217 -0.2	106.4 +26.3	2.9 -0.1	86.6 -1.2	usable	30 W vs 60 W: lower power handling · Xmax 2.9 mm < 3 mm: lower excursion-limited SPL	+
Goldwood GW-210/4	41.8 +1.8	1.067 -0.35	64.2 -15.9	3.5 +0.5	90.7 +2.9	usable	4 Ω vs 8 Ω: amp load changes	+
Goldwood GW-1038	33.7 -6.3	1.1 -0.32	90.299 +10.2	2.5 -0.5	85.5 -2.3	usable	Xmax 2.5 mm < 3 mm: lower excursion-limited SPL	+
Jinwey YDY-250-8	41.8 +1.8	0.949 -0.47	69.3 -10.8	2 -1	88.4 +0.6	usable	Xmax 2 mm < 3 mm: lower excursion-limited SPL	+
Kenford HW-1006	37 -3	0.787 -0.63	75 -5.1	4.7 +1.7	88.3 +0.5	usable		+
Hyper Phase BF10R	45 +5	0.831 -0.59	78 -2.1	3.5 +0.5	90.8 +3	usable		+
Goldwood GW-1034	34.3 -5.7	0.881 -0.54	81.4 +1.3	2.5 -0.5	90.3 +2.5	usable	4 Ω vs 8 Ω: amp load changes · Xmax 2.5 mm < 3 mm: lower excursion-limited SPL	+

Compare the closest 3 against the 28MP10 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.