Davis 25SCA10W
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 28 Hz |
| Qts | 0.332 |
| Qes | 0.39 |
| Qms | 2.23 |
| Vas | 109 L |
| Sd | 330 cm² |
| Xmax | 4 mm |
| Re | 5.96 Ω |
| Bl | 11 T·m |
| Mms | 45.2 g |
| Pe | 60 W |
| Sensitivity | 91.1 dB |
Alignment hint
| EBP | 72 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 30.8 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Davis 25SCA10WR-8 v2018 | 28 = | 0.332 = | 109 = | 5 +1 | 91.1 = | close | + | |
| Ciare HW251 | 29 +1 | 0.33 = | 111 +2 | 4 = | 90.6 -0.5 | close | + | |
| Davis 25GCA10W | 26 -2 | 0.332 = | 109 = | 4 = | 90.2 -0.9 | close | + | |
| Alcone AC 10 HE | 28 = | 0.322 -0.01 | 100 -9 | 3.5 -0.5 | 90.9 -0.2 | close | Xmax 3.5 mm < 4 mm: lower excursion-limited SPL | + |
| Beyma 10B-60 | 31 +3 | 0.35 +0.02 | 115 +6 | 4 = | 90.6 -0.5 | close | 40 W vs 60 W: lower power handling | + |
| ATS Acoustics HG25 | 29 +1 | 0.325 -0.01 | 129.3 +20.3 | 4 = | 92.7 +1.6 | close | + | |
| Beyma 10B60 | 31 +3 | 0.36 +0.03 | 115 +6 | 4 = | 91.9 +0.8 | close | + | |
| Peerless SLS-250S38CP00-04 | 26.9 -1.1 | 0.369 +0.04 | 108.5 -0.5 | 4.6 +0.6 | 93.1 +2 | close | 4 Ω vs 8 Ω: amp load changes | + |
| SEAS CA26RFX | 29 +1 | 0.337 +0.01 | 129 +20 | 7 +3 | 92 +0.9 | close | + | |
| Focal 11V 7511 | 27 -1 | 0.33 = | 128.5 +19.5 | 9 +5 | 91.5 +0.4 | close | + |
Compare the closest 3 against the 25SCA10W →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.