Davis 25GCA10WR vp
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 39.2 Hz |
| Qts | 0.405 |
| Qes | 0.48 |
| Qms | 2.6 |
| Vas | 74.4 L |
| Sd | 330 cm² |
| Xmax | 6 mm |
| Re | 5.96 Ω |
| Bl | 10.2 T·m |
| Mms | 33.8 g |
| Pe | 130 W |
| Sensitivity | 93 dB |
Alignment hint
| EBP | 82 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 36.3 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Davis 25GC10R | 37.2 -2 | 0.397 -0.01 | 80.9 +6.5 | 5.7 -0.3 | 93.5 +0.5 | close | 100 W vs 130 W: lower power handling · Xmax 5.7 mm < 6 mm: lower excursion-limited SPL | + |
| Faital PRO 10FE330 | 35 -4.2 | 0.4 -0.01 | 72.4 -2 | 8.32 +2.32 | 92 -1 | close | + | |
| SICA 10 H 2 CS 8 Ohms | 36 -3.2 | 0.393 -0.01 | 65.4 -9 | 6 = | 91.8 -1.2 | close | + | |
| Celestion PULSE XL 10.20-8 | 37.5 -1.7 | 0.459 +0.05 | 76.9 +2.5 | 8.3 +2.3 | 92.5 -0.5 | close | + | |
| Focal 10W 6452 | 37.7 -1.5 | 0.441 +0.04 | 66.8 -7.6 | 5.4 -0.6 | 92.6 -0.4 | close | 100 W vs 130 W: lower power handling · Xmax 5.4 mm < 6 mm: lower excursion-limited SPL | + |
| Pioneer TS-WS303F | 32 -7.2 | 0.415 +0.01 | 70 -4.4 | 7.3 +1.3 | 92.8 -0.2 | close | 4 Ω vs 8 Ω: amp load changes | + |
| SICA 10 SR 2 PL Z006004 | 33.6 -5.6 | 0.423 +0.02 | 66.5 -7.9 | 6.5 +0.5 | 93.3 +0.3 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Realistic 40-9006 | 39 -0.2 | 0.452 +0.05 | 62 -12.4 | 6.7 +0.7 | 91.8 -1.2 | close | + | |
| HiVi W10 | 35 -4.2 | 0.368 -0.04 | 81.4 +7 | 6.2 +0.2 | 91.8 -1.2 | close | + | |
| Eminence LEGEND BP102 | 35 -4.2 | 0.432 +0.03 | 91.2 +16.8 | 6.2 +0.2 | 92.7 -0.3 | close | + |
Compare the closest 3 against the 25GCA10WR vp →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.