David Eden EC1060XS16
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 16 Ω |
| Fs | 42.6 Hz |
| Qts | 0.304 |
| Qes | 0.34 |
| Qms | 2.9 |
| Vas | 93.4 L |
| Sd | 350.1 cm² |
| Xmax | 4.7 mm |
| Re | 9.9 Ω |
| Bl | 14.1 T·m |
| Mms | 25.7 g |
| Pe | 150 W |
| Sensitivity | 94.3 dB |
Alignment hint
| EBP | 125 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 21.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Eminence DELTALITE 2510 | 41.2 -1.4 | 0.295 -0.01 | 107.9 +14.5 | 4.2 -0.5 | 97.5 +3.2 | close | 8 Ω vs 16 Ω: amp load changes · Xmax 4.2 mm < 4.7 mm: lower excursion-limited SPL | + |
| Ciare CW250C | 39 -3.6 | 0.27 -0.03 | 77 -16.4 | 5 +0.3 | 93.3 -1 | usable | 4 Ω vs 16 Ω: amp load changes | + |
| Volt B250.8 v2014 | 32 -10.6 | 0.302 = | 89 -4.4 | 5.5 +0.8 | 92.4 -1.9 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Beyma 10WRS300 | 41 -1.6 | 0.276 -0.03 | 66.5 -26.9 | 5.8 +1.1 | 95.1 +0.8 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Eminence KAPPA PRO 10 LF | 39 -3.6 | 0.281 -0.02 | 73 -20.4 | 7.2 +2.5 | 95.4 +1.1 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| SICA 10 H 2 CS 4 Ohms | 30.6 -12 | 0.303 = | 75.8 -17.6 | 5.3 +0.6 | 94.4 +0.1 | usable | 4 Ω vs 16 Ω: amp load changes | + |
| Monacor SPH-275C | 31 -11.6 | 0.287 -0.02 | 100 +6.6 | 6 +1.3 | 93.1 -1.2 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Beyma 10LW30 | 42 -0.6 | 0.293 -0.01 | 55 -38.4 | 7 +2.3 | 94.6 +0.3 | usable | 8 Ω vs 16 Ω: amp load changes | + |
| Alpine 6013 | 30 -12.6 | 0.313 +0.01 | 96 +2.6 | 3.8 -0.9 | 94.8 +0.5 | usable | 4 Ω vs 16 Ω: amp load changes · 100 W vs 150 W: lower power handling · Xmax 3.8 mm < 4.7 mm: lower excursion-limited SPL | + |
| Davis 25SCA10T | 41 -1.6 | 0.449 +0.15 | 91.3 -2.1 | 4.8 +0.1 | 93.4 -0.9 | usable | 8 Ω vs 16 Ω: amp load changes · 60 W vs 150 W: lower power handling | + |
Compare the closest 3 against the EC1060XS16 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.