David Eden EC1060XL8
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 49.6 Hz |
| Qts | 0.207 |
| Qes | 0.22 |
| Qms | 3.52 |
| Vas | 55.5 L |
| Sd | 350.1 cm² |
| Xmax | 2.4 mm |
| Re | 5.15 Ω |
| Bl | 15.2 T·m |
| Mms | 31.9 g |
| Pe | 150 W |
| Sensitivity | 98.8 dB |
Alignment hint
| EBP | 225 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 5.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 10"MI100 | 50 +0.4 | 0.21 = | 54 -1.5 | 4.5 +2.1 | 98 -0.8 | close | + | |
| Beyma 10MI100 v2017 | 50 +0.4 | 0.213 +0.01 | 54 -1.5 | 4.5 +2.1 | 97.9 -0.9 | close | + | |
| Eminence KAPPALITE 3010 MB | 50.7 +1.1 | 0.204 = | 52.1 -3.4 | 5 +2.6 | 99.1 +0.3 | close | + | |
| Beyma 10M250 | 50 +0.4 | 0.214 +0.01 | 64 +8.5 | 3.5 +1.1 | 99 +0.2 | close | + | |
| Eminence Kappa Pro-10A | 46 -3.6 | 0.2 -0.01 | 52.2 -3.3 | 3.2 +0.8 | 97 -1.8 | close | + | |
| Eminence KAPPA PRO 10 | 46 -3.6 | 0.196 -0.01 | 52.2 -3.3 | 3.2 +0.8 | 96.9 -1.9 | close | + | |
| Eminence KAPPA PRO 10 A | 46 -3.6 | 0.196 -0.01 | 52.2 -3.3 | 3.2 +0.8 | 96.9 -1.9 | close | + | |
| Warehouse Sound WGS 12L | 49.6 = | 0.242 +0.04 | 50.5 -5 | 3.3 +0.9 | 97.3 -1.5 | close | + | |
| Faital PRO 10PR300 | 50 +0.4 | 0.24 +0.03 | 49.8 -5.7 | 4.92 +2.52 | 96 -2.8 | usable | 4 Ω vs 8 Ω: amp load changes | + |
| Dayton Audio APOLLO 10N | 54 +4.4 | 0.222 +0.02 | 43.5 -12 | 4.3 +1.9 | 97.1 -1.7 | usable | + |
Compare the closest 3 against the EC1060XL8 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.