David Eden EC1060XL4
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 4 Ω |
| Fs | 46.1 Hz |
| Qts | 0.157 |
| Qes | 0.17 |
| Qms | 2.08 |
| Vas | 67.7 L |
| Sd | 350.1 cm² |
| Xmax | 3.3 mm |
| Re | 2.92 Ω |
| Bl | 12.3 T·m |
| Mms | 30.2 g |
| Pe | 150 W |
| Sensitivity | 102.3 dB |
Alignment hint
| EBP | 271 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 3.5 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| David Eden EC1060XS8 | 39 -7.1 | 0.18 +0.02 | 78 +10.3 | 4.3 +1 | 99 -3.3 | usable | + | |
| Beyma 10M250 | 50 +3.9 | 0.214 +0.06 | 64 -3.7 | 3.5 +0.2 | 99 -3.3 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Eminence KAPPA PRO 10 | 46 -0.1 | 0.196 +0.04 | 52.2 -15.5 | 3.2 -0.1 | 96.9 -5.4 | usable | 8 Ω vs 4 Ω: amp load changes · Xmax 3.2 mm < 3.3 mm: lower excursion-limited SPL | + |
| Eminence KAPPA PRO 10 A | 46 -0.1 | 0.196 +0.04 | 52.2 -15.5 | 3.2 -0.1 | 96.9 -5.4 | usable | 8 Ω vs 4 Ω: amp load changes · Xmax 3.2 mm < 3.3 mm: lower excursion-limited SPL | + |
| Electro-Voice DL10X | 60 +13.9 | 0.152 -0.01 | 44 -23.7 | 3.1 -0.2 | 101 -1.3 | usable | 8 Ω vs 4 Ω: amp load changes · Xmax 3.1 mm < 3.3 mm: lower excursion-limited SPL | + |
| Eminence Kappa Pro-10A | 46 -0.1 | 0.2 +0.04 | 52.2 -15.5 | 3.2 -0.1 | 97 -5.3 | usable | 8 Ω vs 4 Ω: amp load changes · Xmax 3.2 mm < 3.3 mm: lower excursion-limited SPL | + |
| Eminence KAPPALITE 3010 MB | 50.7 +4.6 | 0.204 +0.05 | 52.1 -15.6 | 5 +1.7 | 99.1 -3.2 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma 10"MI100 | 50 +3.9 | 0.21 +0.05 | 54 -13.7 | 4.5 +1.2 | 98 -4.3 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma 10MI100 v2017 | 50 +3.9 | 0.213 +0.06 | 54 -13.7 | 4.5 +1.2 | 97.9 -4.4 | usable | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma 10G150 | 47 +0.9 | 0.246 +0.09 | 75 +7.3 | 3.7 +0.4 | 97 -5.3 | usable | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the EC1060XL4 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.