DAS Audio G-30
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 29.4 Hz |
| Qts | 0.179 |
| Qes | 0.199 |
| Qms | 1.78 |
| Vas | 337 L |
| Sd | 830 cm² |
| Xmax | 3.3 mm |
| Re | 6.5 Ω |
| Bl | 22.5 T·m |
| Mms | 83.7 g |
| Pe | 200 W |
| Sensitivity | 99.2 dB |
Alignment hint
| EBP | 148 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 23.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| JBL E140 vp gilles | 28.4 -1 | 0.184 +0.01 | 328.2 -8.8 | 6 +2.7 | 99.2 = | close | + | |
| JBL E140 | 32 +2.6 | 0.183 = | 297.3 -39.7 | 3.6 +0.3 | 100.7 +1.5 | close | + | |
| JBL K140 | 30 +0.6 | 0.211 +0.03 | 297.3 -39.7 | 4.1 +0.8 | 99.2 = | close | 150 W vs 200 W: lower power handling | + |
| GOTO SG38WNS | 28.1 -1.3 | 0.154 -0.02 | 348.6 +11.6 | 4 +0.7 | 97.4 -1.8 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Beyma 15"P80Fe/N | 32 +2.6 | 0.18 = | 305 -32 | 7.5 +4.2 | 101 +1.8 | close | + | |
| Tannoy GOLD 15 | 26 -3.4 | 0.198 +0.02 | 350 +13 | 3 -0.3 | 98.1 -1.1 | close | 50 W vs 200 W: lower power handling · Xmax 3 mm < 3.3 mm: lower excursion-limited SPL | + |
| Altec 604-8K | 28.5 -0.9 | 0.204 +0.02 | 412.9 +75.9 | 3.8 +0.5 | 99.5 +0.3 | close | 100 W vs 200 W: lower power handling | + |
| Beyma 15B100R vp GH | 27.3 -2.1 | 0.215 +0.04 | 334 -3 | 3 -0.3 | 98.6 -0.6 | close | 150 W vs 200 W: lower power handling · Xmax 3 mm < 3.3 mm: lower excursion-limited SPL | + |
| Altec 904-8A | 30.5 +1.1 | 0.164 -0.01 | 401.5 +64.5 | 3.3 = | 101.9 +2.7 | close | 150 W vs 200 W: lower power handling | + |
| Beyma 15P80FE/N | 32 +2.6 | 0.184 +0.01 | 305 -32 | 8.8 +5.5 | 101 +1.8 | usable | + |
Compare the closest 3 against the G-30 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.