Cyrille Audio BM38ND76P
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 33 Hz |
| Qts | 0.236 |
| Qes | 0.25 |
| Qms | 4.26 |
| Vas | 372 L |
| Sd | 908 cm² |
| Xmax | 1.8 mm |
| Re | 5.5 Ω |
| Bl | 18.2 T·m |
| Mms | 72.3 g |
| Pe | 150 W |
| Sensitivity | 100.9 dB |
Alignment hint
| EBP | 132 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 46.6 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Cyrille Audio BM38ND76P-2 | 33 = | 0.236 = | 372 = | 1.9 +0.1 | 100.9 = | close | + | |
| Focal AUDIOM 15 | 32.5 -0.5 | 0.236 = | 379.7 +7.7 | 6 +4.2 | 100.4 -0.5 | close | + | |
| Beyma 15 GI-100 | 33 = | 0.243 +0.01 | 430 +58 | 4 +2.2 | 101 +0.1 | close | + | |
| Altec 421-8H | 31.5 -1.5 | 0.245 +0.01 | 362.5 -9.5 | 1.3 -0.5 | 99.8 -1.1 | close | Xmax 1.3 mm < 1.8 mm: lower excursion-limited SPL | + |
| Altec 918-8A | 32.6 -0.4 | 0.209 -0.03 | 372.7 +0.7 | 1.3 -0.5 | 101.4 +0.5 | close | 35 W vs 150 W: lower power handling · Xmax 1.3 mm < 1.8 mm: lower excursion-limited SPL | + |
| Iconic Speakers 165-16G | 37 +4 | 0.22 -0.02 | 357.9 -14.1 | 3.1 +1.3 | 99.4 -1.5 | close | 16 Ω vs 8 Ω: amp load changes · 75 W vs 150 W: lower power handling | + |
| Supravox 400 GMF PRO | 32 -1 | 0.263 +0.03 | 370 -2 | 4.8 +3 | 99.4 -1.5 | close | + | |
| Eminence KAPPA 15 C | 31 -2 | 0.244 +0.01 | 329.9 -42.1 | 5.5 +3.7 | 101.3 +0.4 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Iconic Speakers 165-8G | 37 +4 | 0.265 +0.03 | 363.7 -8.3 | 3.5 +1.7 | 101.3 +0.4 | close | 75 W vs 150 W: lower power handling | + |
| DAS Audio MI-30 | 34.3 +1.3 | 0.203 -0.03 | 360 -12 | 4.3 +2.5 | 101.2 +0.3 | close | + |
Compare the closest 3 against the BM38ND76P →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.