Cube F10 SELECT

10" · 8 Ω · 25 W · 90.2 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	30 Hz
Qts	0.567
Qes	0.6
Qms	10.4
Vas	121 L
Sd	346 cm²
Xmax	4.6 mm
Re	6.5 Ω
Bl	8.9 T·m
Mms	39 g
Pe	25 W
Sensitivity	90.2 dB

Alignment hint

EBP	50 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 217.9 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
SEAS 25F-WBX	32 +2	0.597 +0.03	114.5 -6.5	6 +1.4	89.9 -0.3	close		+
Monacor SP-254TC	30 =	0.505 -0.06	109 -12	5 +0.4	90 -0.2	close		+
Cube F10 NEO	30 =	0.505 -0.06	127 +6	5.1 +0.5	91.8 +1.6	close		+
Morel MW 1075	29 -1	0.622 +0.06	123 +2	4.3 -0.3	88.6 -1.6	close	Xmax 4.3 mm < 4.6 mm: lower excursion-limited SPL	+
SEAS 25F-WBC vp1 Gils	35.1 +5.1	0.58 +0.01	129.6 +8.6	6 +1.4	90.1 -0.1	close	16 Ω vs 8 Ω: amp load changes	+
Audax SON28A vp	30 =	0.505 -0.06	114.2 -6.8	4 -0.6	89.1 -1.1	close	Xmax 4 mm < 4.6 mm: lower excursion-limited SPL	+
SEAS 25F-WBC vp2 Gils	35.1 +5.1	0.58 +0.01	129.6 +8.6	4 -0.6	90.1 -0.1	close	16 Ω vs 8 Ω: amp load changes · Xmax 4 mm < 4.6 mm: lower excursion-limited SPL	+
Europsonic HP25/100 vp	36.6 +6.6	0.552 -0.01	124.4 +3.4	5.5 +0.9	91.6 +1.4	close		+
Visaton GF 250 - 2x4 Ohms série	26 -4	0.554 -0.01	110 -11	10 +5.4	91 +0.8	close	4 Ω vs 8 Ω: amp load changes	+
Dayton Audio DC250-8	28.9 -1.1	0.445 -0.12	111.4 -9.6	4.5 -0.1	90.1 -0.1	close	Xmax 4.5 mm < 4.6 mm: lower excursion-limited SPL	+

Compare the closest 3 against the F10 SELECT →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.