Cube F10 NEO

10" · 8 Ω · 30 W · 91.8 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	30 Hz
Qts	0.505
Qes	0.52
Qms	17.8
Vas	127 L
Sd	346 cm²
Xmax	5.1 mm
Re	5.5 Ω
Bl	8.6 T·m
Mms	37.2 g
Pe	30 W
Sensitivity	91.8 dB

Alignment hint

EBP	58 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 132.2 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Monacor SP-254TC	30 =	0.505 =	109 -18	5 -0.1	90 -1.8	close	Xmax 5 mm < 5.1 mm: lower excursion-limited SPL	+
Cube F10 SELECT	30 =	0.567 +0.06	121 -6	4.6 -0.5	90.2 -1.6	close	Xmax 4.6 mm < 5.1 mm: lower excursion-limited SPL	+
Beyma 10BR60 V2	31 +1	0.471 -0.03	108.2 -18.8	6.5 +1.4	90.6 -1.2	close		+
Europsonic HP25/100 vp	36.6 +6.6	0.552 +0.05	124.4 -2.6	5.5 +0.4	91.6 -0.2	close		+
Dynaudio MW 190	31 +1	0.527 +0.02	143.4 +16.4	9 +3.9	93.5 +1.7	close	4 Ω vs 8 Ω: amp load changes	+
Audax SON28A vp	30 =	0.505 =	114.2 -12.8	4 -1.1	89.1 -2.7	close	Xmax 4 mm < 5.1 mm: lower excursion-limited SPL	+
Morel MW 1077	28 -2	0.501 =	147 +20	4.3 -0.8	89.9 -1.9	close	Xmax 4.3 mm < 5.1 mm: lower excursion-limited SPL	+
Dayton Audio SD270-88	29.6 -0.4	0.44 -0.06	112.2 -14.8	6 +0.9	93.7 +1.9	close	4 Ω vs 8 Ω: amp load changes	+
Beyma 10BR60 V2 vp JF rouge	30.7 +0.7	0.435 -0.07	113.7 -13.3	6.5 +1.4	90.2 -1.6	close		+
SEAS 25F-WBC vp1 Gils	35.1 +5.1	0.58 +0.07	129.6 +2.6	6 +0.9	90.1 -1.7	usable	16 Ω vs 8 Ω: amp load changes	+

Compare the closest 3 against the F10 NEO →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.