Conrad CPA15-1000
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 31.3 Hz |
| Qts | 0.193 |
| Qes | 0.197 |
| Qms | 8.314 |
| Vas | 221.7 L |
| Sd | 835 cm² |
| Xmax | 4 mm |
| Re | 5.6 Ω |
| Bl | 25.2 T·m |
| Mms | 113.8 g |
| Pe | 1000 W |
| Sensitivity | 98.9 dB |
Alignment hint
| EBP | 159 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 17.8 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Conrad CPA15-400 | 34.3 +3 | 0.186 -0.01 | 223 +1.3 | 4 = | 100.3 +1.4 | close | 400 W vs 1000 W: lower power handling | + |
| Conrad CPA15-300 v2018 | 33.3 +2 | 0.196 = | 193.6 -28.1 | 4.6 +0.6 | 99.2 +0.3 | close | 300 W vs 1000 W: lower power handling | + |
| PD PD 1550 | 31 -0.3 | 0.212 +0.02 | 242 +20.3 | 7.4 +3.4 | 98.1 -0.8 | close | 600 W vs 1000 W: lower power handling | + |
| Precision Devices PD 1550 | 31 -0.3 | 0.212 +0.02 | 242 +20.3 | 7.4 +3.4 | 98.1 -0.8 | close | 600 W vs 1000 W: lower power handling | + |
| Oberton 15MB600 | 32.4 +1.1 | 0.17 -0.02 | 204 -17.7 | 5.5 +1.5 | 99.9 +1 | close | 600 W vs 1000 W: lower power handling | + |
| Precision Devices PD1550 | 31 -0.3 | 0.21 +0.02 | 242 +20.3 | 12 +8 | 99 +0.1 | close | 600 W vs 1000 W: lower power handling | + |
| RCF L 15/544K | 35 +3.7 | 0.233 +0.04 | 227 +5.3 | 4 = | 98.9 = | close | 400 W vs 1000 W: lower power handling | + |
| Audax PR38S100VST | 33 +1.7 | 0.236 +0.04 | 218.1 -3.6 | 4 = | 97.8 -1.1 | close | 200 W vs 1000 W: lower power handling | + |
| Beyma 15GT200 v2 | 31 -0.3 | 0.218 +0.02 | 270 +48.3 | 5.4 +1.4 | 98.8 -0.1 | close | 250 W vs 1000 W: lower power handling | + |
| Electro-Voice EVX-155 | 35.4 +4.1 | 0.212 +0.02 | 220 -1.7 | 6.4 +2.4 | 100.5 +1.6 | close | 600 W vs 1000 W: lower power handling | + |
Compare the closest 3 against the CPA15-1000 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.