Cobalt CS 10 DVC serie

10" · 8 Ω · 200 W · 88.3 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	30 Hz
Qts	0.387
Qes	0.41
Qms	7.06
Vas	60 L
Sd	325 cm²
Xmax	6 mm
Re	7.3 Ω
Bl	15.3 T·m
Mms	69.5 g
Pe	200 W
Sensitivity	88.3 dB

Alignment hint

EBP	73 · flexible
Sealed Vb (Qtc ≈ 0.71)	≈ 25.7 L

EBP 50-100: works in either a sealed or ported alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Cobalt CS 10 DVC parallele	30 =	0.387 =	60 =	6 =	94.3 +6	close	2 Ω vs 8 Ω: amp load changes	+
JBL P1000	30 =	0.382 -0.01	71 +11	7.8 +1.8	91.2 +2.9	close		+
JBL CS1014	30 =	0.436 +0.05	53.8 -6.2	6 =	90.4 +2.1	close	4 Ω vs 8 Ω: amp load changes · 125 W vs 200 W: lower power handling	+
Boston Acoustics PRO 10.4 LF	33 +3	0.36 -0.03	66.26 +6.26	7.5 +1.5	89.4 +1.1	close	4 Ω vs 8 Ω: amp load changes	+
STX SW.10.2.500.8.F.A.FC.X	25 -5	0.352 -0.04	59 -1	6.8 +0.8	87.6 -0.7	close		+
Image Dynamics IDQ10DQV3	25.5 -4.5	0.384 =	71 +11	9 +3	88.9 +0.6	close		+
Volt DVC251.7	32 +2	0.387 =	53 -7	7.8 +1.8	92.6 +4.3	close	4 Ω vs 8 Ω: amp load changes	+
STX W.27.500.8.FCX	25 -5	0.352 -0.04	59 -1	9.6 +3.6	87.6 -0.7	close		+
SEAS L26ROY-XM001-04 v2018	25 -5	0.417 +0.03	56 -4	9.7 +3.7	88.7 +0.4	usable	4 Ω vs 8 Ω: amp load changes	+
DLS RW10i	28.8 -1.2	0.396 +0.01	63.3 +3.3	9 +3	93.8 +5.5	usable	2 Ω vs 8 Ω: amp load changes	+

Compare the closest 3 against the CS 10 DVC serie →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.