Ciare PW396
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 43 Hz |
| Qts | 0.403 |
| Qes | 0.41 |
| Qms | 24.73 |
| Vas | 129 L |
| Sd | 850 cm² |
| Xmax | 5.8 mm |
| Re | 6 Ω |
| Bl | 20.6 T·m |
| Mms | 107.6 g |
| Pe | 400 W |
| Sensitivity | 97.2 dB |
Alignment hint
| EBP | 105 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 62.1 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| LaVoce WAN153.00 | 43 = | 0.411 +0.01 | 137 +8 | 6.7 +0.9 | 98.3 +1.1 | close | + | |
| Ciare 15.00 W2 | 44.2 +1.2 | 0.413 +0.01 | 127 -2 | 5 -0.8 | 97.3 +0.1 | close | Xmax 5 mm < 5.8 mm: lower excursion-limited SPL | + |
| Ciare FXE 15-4 | 40.6 -2.4 | 0.406 = | 131 +2 | 8.4 +2.6 | 96.5 -0.7 | close | + | |
| 18 Sound 15NTLW3500 | 45 +2 | 0.39 -0.01 | 131 +2 | 8.3 +2.5 | 98 +0.8 | close | + | |
| Eminence 15-3008PS LF | 46.6 +3.6 | 0.396 -0.01 | 130 +1 | 5.5 -0.3 | 98.4 +1.2 | close | Xmax 5.5 mm < 5.8 mm: lower excursion-limited SPL | + |
| Celestion FTR15-3070E | 45.3 +2.3 | 0.4 = | 143.9 +14.9 | 5.5 -0.3 | 98.4 +1.2 | close | Xmax 5.5 mm < 5.8 mm: lower excursion-limited SPL | + |
| Eminence KAPPA PRO 15 LF v1 | 46 +3 | 0.372 -0.03 | 127.5 -1.5 | 6.4 +0.6 | 98.6 +1.4 | close | + | |
| 18 Sound 15NTLW3500 | 46 +3 | 0.4 = | 115 -14 | 8.3 +2.5 | 98 +0.8 | close | 4 Ω vs 8 Ω: amp load changes | + |
| MCM Electronics 55-3243 | 43.6 +0.6 | 0.465 +0.06 | 127.5 -1.5 | 6.2 +0.4 | 98.5 +1.3 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Eminence KAPPA 15 LFA vp2 | 40.8 -2.2 | 0.392 -0.01 | 153.2 +24.2 | 5.5 -0.3 | 97.7 +0.5 | close | Xmax 5.5 mm < 5.8 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the PW396 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.