Ciare PFXI10.50W
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 58 Hz |
| Qts | 0.374 |
| Qes | 0.41 |
| Qms | 4.3 |
| Vas | 38.5 L |
| Sd | 356 cm² |
| Xmax | 4.4 mm |
| Re | 5.8 Ω |
| Bl | 13.4 T·m |
| Mms | 34.7 g |
| Pe | 220 W |
| Sensitivity | 96 dB |
Alignment hint
| EBP | 141 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 15 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| B&C 10CL51 | 58 = | 0.38 +0.01 | 36 -2.5 | 5.5 +1.1 | 96 = | close | 150 W vs 220 W: lower power handling | + |
| Sica 10 Fe 2.5 CP | 57 -1 | 0.37 = | 39.7 +1.2 | 4 -0.4 | 96.3 +0.3 | close | Xmax 4 mm < 4.4 mm: lower excursion-limited SPL | + |
| B&C 10 CL 51 v2024 | 58 = | 0.375 = | 36 -2.5 | 3.9 -0.5 | 96.1 +0.1 | close | 150 W vs 220 W: lower power handling · Xmax 3.9 mm < 4.4 mm: lower excursion-limited SPL | + |
| SICA 10 FE 2.5 CP v2017 | 57 -1 | 0.365 -0.01 | 39.7 +1.2 | 4 -0.4 | 96.3 +0.3 | close | Xmax 4 mm < 4.4 mm: lower excursion-limited SPL | + |
| Sica 10 N 2.5 PL | 57 -1 | 0.36 -0.01 | 40.9 +2.4 | 4.5 +0.1 | 96.6 +0.6 | close | + | |
| SICA 10 N 2.5 PL v2017 | 57 -1 | 0.357 -0.02 | 40.9 +2.4 | 4.5 +0.1 | 96.5 +0.5 | close | + | |
| SB Audience BIANCO-10MW200 | 58 = | 0.336 -0.04 | 39.3 +0.8 | 5.2 +0.8 | 96.2 +0.2 | close | + | |
| SICA 10 E 2 CS | 56 -2 | 0.347 -0.03 | 39.8 +1.3 | 4.1 -0.3 | 96 = | close | 150 W vs 220 W: lower power handling · Xmax 4.1 mm < 4.4 mm: lower excursion-limited SPL | + |
| Beyma 10XC25 | 63 +5 | 0.376 = | 41 +2.5 | 4.5 +0.1 | 97.2 +1.2 | close | + | |
| SICA SL10B25P | 57 -1 | 0.348 -0.03 | 41.9 +3.4 | 4 -0.4 | 95.7 -0.3 | close | Xmax 4 mm < 4.4 mm: lower excursion-limited SPL | + |
Compare the closest 3 against the PFXI10.50W →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.