Ciare M320.5
Thiele-Small parameters
| Nominal size | 12" |
|---|---|
| Impedance | 4 Ω |
| Fs | 34.4 Hz |
| Qts | 0.43 |
| Qes | 0.46 |
| Qms | 6.48 |
| Vas | 93.2 L |
| Sd | 530.9 cm² |
| Xmax | 4.4 mm |
| Re | 3.15 Ω |
| Bl | 11.6 T·m |
| Mms | 90.8 g |
| Pe | 100 W |
| Sensitivity | 95.2 dB |
Alignment hint
| EBP | 75 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 54.7 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma 12BR70 vp n1 | 37.2 +2.8 | 0.407 -0.02 | 97.7 +4.5 | 4.6 +0.2 | 94.6 -0.6 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Ciare HSB322-22 | 35 +0.6 | 0.42 -0.01 | 83 -10.2 | 7.5 +3.1 | 95 -0.2 | close | + | |
| Beyma 12BR70 vp n4 | 35.1 +0.7 | 0.388 -0.04 | 95.7 +2.5 | 4.5 +0.1 | 93.9 -1.3 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma SM112/N vp1 | 37 +2.6 | 0.433 = | 90 -3.2 | 7.3 +2.9 | 92.7 -2.5 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma SM112/N v2012 | 43 +8.6 | 0.434 = | 94 +0.8 | 7.3 +2.9 | 95.3 +0.1 | close | 8 Ω vs 4 Ω: amp load changes | + |
| McCauley 6232 | 35 +0.6 | 0.411 -0.02 | 106.2 +13 | 8.4 +4 | 93.6 -1.6 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Eminence DELTA 12 LF v1 | 45 +10.6 | 0.424 -0.01 | 95.5 +2.3 | 4.6 +0.2 | 96.1 +0.9 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Boston Acoustics PRO 12 SLF | 30 -4.4 | 0.448 +0.02 | 84 -9.2 | 6.8 +2.4 | 95.8 +0.6 | close | 2 Ω vs 4 Ω: amp load changes | + |
| Davis 31TPA vp nº2 dats v2 | 46.4 +12 | 0.437 +0.01 | 96.4 +3.2 | 4.4 = | 95.8 +0.6 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Kartesian WOM300_vDIY | 37 +2.6 | 0.362 -0.07 | 91.7 -1.5 | 6.4 +2 | 94.6 -0.6 | close | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the M320.5 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.