Ciare HX255 GR vp
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 55.3 Hz |
| Qts | 0.569 |
| Qes | 0.671 |
| Qms | 3.752 |
| Vas | 57.4 L |
| Sd | 352 cm² |
| Xmax | 4 mm |
| Re | 5.27 Ω |
| Bl | 8.3 T·m |
| Mms | 25.1 g |
| Pe | 100 W |
| Sensitivity | 95.4 dB |
Alignment hint
| EBP | 82 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 105.4 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Beyma PRO CM10 | 60 +4.7 | 0.594 +0.03 | 49.6 -7.8 | 4.2 +0.2 | 95.3 -0.1 | close | + | |
| Faital PRO 10FE200 | 55 -0.3 | 0.49 -0.08 | 61 +3.6 | 4.62 +0.62 | 96 +0.6 | close | 4 Ω vs 8 Ω: amp load changes | + |
| STX W.25.300.8.MC | 51 -4.3 | 0.483 -0.09 | 59 +1.6 | 4 = | 95.2 -0.2 | close | + | |
| Eminence BETA10 | 53 -2.3 | 0.489 -0.08 | 60.1 +2.7 | 5 +1 | 95.8 +0.4 | close | + | |
| Siemens C 71233-4A-A1 | 70.2 +14.9 | 0.546 -0.02 | 58.6 +1.2 | 4 = | 95.1 -0.3 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Faital PRO 10FE200 | 55 -0.3 | 0.69 +0.12 | 61.7 +4.3 | 4.67 +0.67 | 96 +0.6 | close | + | |
| Fane 10-125 | 55 -0.3 | 0.638 +0.07 | 50.6 -6.8 | 4.7 +0.7 | 93.6 -1.8 | close | + | |
| Fane SOVEREIGN 10-125 v2 | 55 -0.3 | 0.638 +0.07 | 50 -7.4 | 4.6 +0.6 | 93.5 -1.9 | close | + | |
| Faital PRO 10FE300 | 50 -5.3 | 0.52 -0.05 | 50.5 -6.9 | 5.52 +1.52 | 96 +0.6 | close | + | |
| Faital PRO 10FE200 v2014 | 55 -0.3 | 0.695 +0.13 | 53.4 -4 | 4.7 +0.7 | 94.1 -1.3 | close | + |
Compare the closest 3 against the HX255 GR vp →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.