Celestion TF1830
Thiele-Small parameters
| Nominal size | 18" |
|---|---|
| Impedance | 4 Ω |
| Fs | 35.7 Hz |
| Qts | 0.393 |
| Qes | 0.434 |
| Qms | 4.213 |
| Vas | 202.4 L |
| Sd | 1193.8 cm² |
| Xmax | 4.5 mm |
| Re | 2.58 Ω |
| Bl | 16.2 T·m |
| Mms | 196.2 g |
| Pe | 500 W |
| Sensitivity | 100.2 dB |
Alignment hint
| EBP | 82 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 90.5 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| RCF W470 | 36 +0.3 | 0.35 -0.04 | 201 -1.4 | 6 +1.5 | 99.7 -0.5 | close | + | |
| RCF LF 18P400 | 39.5 +3.8 | 0.391 = | 201 -1.4 | 8 +3.5 | 99 -1.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Fane Colossus 18SB | 36 +0.3 | 0.346 -0.05 | 199 -3.4 | 8.25 +3.75 | 100 -0.2 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma 18G550 | 36 +0.3 | 0.374 -0.02 | 210 +7.6 | 8.1 +3.6 | 97.8 -2.4 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma 18G550 v2015 | 36 +0.3 | 0.374 -0.02 | 210 +7.6 | 8.1 +3.6 | 97.8 -2.4 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Sica 18 S 4 PL | 36.2 +0.5 | 0.39 = | 189 -13.4 | 8 +3.5 | 97.3 -2.9 | close | 8 Ω vs 4 Ω: amp load changes | + |
| HiVi PA18 | 41 +5.3 | 0.388 -0.01 | 233.1 +30.7 | 4.9 +0.4 | 99.6 -0.6 | close | 8 Ω vs 4 Ω: amp load changes | + |
| RCF L 18/851KN | 39 +3.3 | 0.357 -0.04 | 200 -2.4 | 5 +0.5 | 98.4 -1.8 | close | 8 Ω vs 4 Ω: amp load changes | + |
| B&C 18 TBX 100 (prodance) | 36.6 +0.9 | 0.406 +0.01 | 198 -4.4 | 9 +4.5 | 97.4 -2.8 | close | 8 Ω vs 4 Ω: amp load changes | + |
| Beyma 18LEX1600/ND-8 | 35 -0.7 | 0.39 = | 205 +2.6 | 10.4 +5.9 | 96.8 -3.4 | close | 8 Ω vs 4 Ω: amp load changes | + |
Compare the closest 3 against the TF1830 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.