Celestion TF 1020 v2014
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 60.9 Hz |
| Qts | 0.32 |
| Qes | 0.361 |
| Qms | 2.853 |
| Vas | 37.5 L |
| Sd | 344 cm² |
| Xmax | 2 mm |
| Re | 5.79 Ω |
| Bl | 13.6 T·m |
| Mms | 30.3 g |
| Pe | 150 W |
| Sensitivity | 97.1 dB |
Alignment hint
| EBP | 169 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 9.7 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Celestion TF1020 | 60.9 = | 0.32 = | 37.45 -0.05 | 2 = | 95.5 -1.6 | close | + | |
| Monacor SP-310CX | 60 -0.9 | 0.324 = | 41 +3.5 | 2.5 +0.5 | 97.4 +0.3 | close | + | |
| B&C 10 NCX | 57 -3.9 | 0.32 = | 40 +2.5 | 3 +1 | 96.8 -0.3 | close | + | |
| DLS DLS 1021 | 61 +0.1 | 0.312 -0.01 | 35.5 -2 | 4 +2 | 97.4 +0.3 | close | + | |
| RCF MB 10N251 (prodance) | 58.9 -2 | 0.33 +0.01 | 38.8 +1.3 | 4.8 +2.8 | 97.3 +0.2 | close | + | |
| Eminence DELTA 10B | 65 +4.1 | 0.33 +0.01 | 36 -1.5 | 3.5 +1.5 | 98 +0.9 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Fane SOVEREIGN PRO 10-300 | 58 -2.9 | 0.322 = | 41 +3.5 | 4.7 +2.7 | 97.2 +0.1 | close | + | |
| Oberton 10NMB200 | 58.67 -2.23 | 0.316 = | 34.93 -2.57 | 4.25 +2.25 | 98 +0.9 | close | + | |
| B&C 10 HPL 64 | 61 +0.1 | 0.307 -0.01 | 32 -5.5 | 3.8 +1.8 | 97.1 = | close | + | |
| PHL Audio 3020 | 60 -0.9 | 0.337 +0.02 | 41 +3.5 | 4.1 +2.1 | 97.6 +0.5 | close | + |
Compare the closest 3 against the TF 1020 v2014 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.