Celestion TF 1018

10" · 8 Ω · 150 W · 96.3 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	79.8 Hz
Qts	0.527
Qes	0.624
Qms	3.381
Vas	23.8 L
Sd	346.4 cm²
Xmax	2 mm
Re	5.73 Ω
Bl	11.4 T·m
Mms	28.1 g
Pe	150 W
Sensitivity	96.3 dB

Alignment hint

EBP	128 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 29.7 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Precision Devices PD102 ER	81.8 +2	0.523 =	26 +2.2	5 +3	98 +1.7	close	16 Ω vs 8 Ω: amp load changes · 100 W vs 150 W: lower power handling	+
Celestion BL10-100X	74.4 -5.4	0.532 +0.01	25.1 +1.3	3.5 +1.5	93.8 -2.5	close	100 W vs 150 W: lower power handling	+
Celestion BL10-100	85.9 +6.1	0.587 +0.06	25.8 +2	2.5 +0.5	97.3 +1	close	100 W vs 150 W: lower power handling	+
Selenium 10MB3P	80 +0.2	0.46 -0.07	23 -0.8	6 +4	95.8 -0.5	close		+
PD PD 102ER	81.8 +2	0.523 =	26 +2.2	1.3 -0.7	97.1 +0.8	close	100 W vs 150 W: lower power handling · Xmax 1.3 mm < 2 mm: lower excursion-limited SPL	+
Precision Devices PD 102ER	81.8 +2	0.523 =	26 +2.2	1.3 -0.7	97.1 +0.8	close	100 W vs 150 W: lower power handling · Xmax 1.3 mm < 2 mm: lower excursion-limited SPL	+
Celestion BL10-200X	73 -6.8	0.48 -0.05	22.74 -1.06	4 +2	93.8 -2.5	usable		+
Celestion FTX1025	71.5 -8.3	0.44 -0.09	25.9 +2.1	3 +1	96.2 -0.1	usable		+
LaVoce WAN102.50-16	76 -3.8	0.43 -0.1	24.11 +0.31	5.5 +3.5	97 +0.7	usable	16 Ω vs 8 Ω: amp load changes	+
Celestion TF 1020 v2019	79 -0.8	0.386 -0.14	22.1 -1.7	2 =	97.6 +1.3	usable		+

Compare the closest 3 against the TF 1018 →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.