Celestion PULSE 10
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 68 Hz |
| Qts | 0.439 |
| Qes | 0.53 |
| Qms | 2.54 |
| Vas | 25.8 L |
| Sd | 346.2 cm² |
| Xmax | 3.4 mm |
| Re | 6.03 Ω |
| Bl | 13.2 T·m |
| Mms | 35.7 g |
| Pe | 200 W |
| Sensitivity | 95.1 dB |
Alignment hint
| EBP | 128 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 16.2 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Celestion FTX1025 | 71.5 +3.5 | 0.44 = | 25.9 +0.1 | 3 -0.4 | 96.2 +1.1 | close | Xmax 3 mm < 3.4 mm: lower excursion-limited SPL | + |
| B&C 10 FCX 64 | 63 -5 | 0.417 -0.02 | 25 -0.8 | 4.4 +1 | 95.1 = | close | + | |
| 18 Sound 10W650 | 67 -1 | 0.48 +0.04 | 26 +0.2 | 5.7 +2.3 | 96 +0.9 | close | + | |
| LaVoce WAF102.52 | 66 -2 | 0.412 -0.03 | 23.5 -2.3 | 4.5 +1.1 | 96 +0.9 | close | + | |
| Celestion BN10-300X(4) | 64.2 -3.8 | 0.43 -0.01 | 29.2 +3.4 | 4 +0.6 | 93.8 -1.3 | close | 4 Ω vs 8 Ω: amp load changes · 150 W vs 200 W: lower power handling | + |
| Celestion BN10-300X | 64.2 -3.8 | 0.432 -0.01 | 29.2 +3.4 | 4 +0.6 | 96.9 +1.8 | close | + | |
| 18 Sound 10W650 | 64 -4 | 0.41 -0.03 | 27 +1.2 | 5.7 +2.3 | 96 +0.9 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Eminence DELTA-10A-2 | 69.7 +1.7 | 0.44 = | 29.73 +3.93 | 6.39 +2.99 | 96.7 +1.6 | close | + | |
| Oberton 10M150 | 74 +6 | 0.43 -0.01 | 25.9 +0.1 | 3.25 -0.15 | 99 +3.9 | close | 150 W vs 200 W: lower power handling · Xmax 3.25 mm < 3.4 mm: lower excursion-limited SPL | + |
| Hartke 10XL16 | 69.3 +1.3 | 0.47 +0.03 | 27.3 +1.5 | 5 +1.6 | 92.5 -2.6 | close | 16 Ω vs 8 Ω: amp load changes | + |
Compare the closest 3 against the PULSE 10 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.