Celestion K15T-100
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 35 Hz |
| Qts | 0.616 |
| Qes | 0.689 |
| Qms | 5.8 |
| Vas | 364.7 L |
| Sd | 855 cm² |
| Xmax | 3 mm |
| Re | 6.79 Ω |
| Bl | 11.2 T·m |
| Mms | 58.1 g |
| Pe | 100 W |
| Sensitivity | 96.3 dB |
Alignment hint
| EBP | 51 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 1148 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Celestion K15-100 | 35 = | 0.594 -0.02 | 342 -22.7 | 5 +2 | 96.2 -0.1 | close | + | |
| Eminence BETA 15 | 35 = | 0.585 -0.03 | 334.6 -30.1 | 4 +1 | 96.6 +0.3 | close | + | |
| Eminence BETA 15A | 35 = | 0.585 -0.03 | 334.6 -30.1 | 4 +1 | 96.6 +0.3 | close | + | |
| Beyma CM15/T | 34 -1 | 0.615 = | 293 -71.7 | 3.5 +0.5 | 95.4 -0.9 | close | + | |
| Eminence BETA-15A | 35 = | 0.58 -0.04 | 334.6 -30.1 | 4 +1 | 98.2 +1.9 | close | + | |
| Selenium 15PW3 | 37 +2 | 0.61 -0.01 | 274 -90.7 | 3 = | 94.9 -1.4 | close | + | |
| Klipsch K34E | 28 -7 | 0.63 +0.01 | 343 -21.7 | 4 +1 | 95.5 -0.8 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Davis 39RCA15 | 33.7 -1.3 | 0.612 = | 258 -106.7 | 4 +1 | 95.3 -1 | close | + | |
| Klipsch K33E | 27 -8 | 0.63 +0.01 | 343 -21.7 | 4 +1 | 95.5 -0.8 | close | 4 Ω vs 8 Ω: amp load changes | + |
| Hyper Phase CM15T | 35 = | 0.508 -0.11 | 308 -56.7 | 3.5 +0.5 | 97 +0.7 | usable | + |
Compare the closest 3 against the K15T-100 →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.