Celestion K10-200E

10" · 8 Ω · 200 W · 97.3 dB · datasheet ↗

Thiele-Small parameters

Nominal size	10"
Impedance	8 Ω
Fs	67 Hz
Qts	0.471
Qes	0.499
Qms	8.41
Vas	37 L
Sd	346.4 cm²
Xmax	4 mm
Re	5.3 Ω
Bl	10.7 T·m
Mms	25.6 g
Pe	200 W
Sensitivity	97.3 dB

Alignment hint

EBP	134 · ported
Sealed Vb (Qtc ≈ 0.71)	≈ 29.5 L

EBP > 100: favours a ported (bass-reflex) alignment.

Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.

Substitute candidates

Driver	Fs (Hz)	Qts	Vas (L)	Xmax (mm)	Sens (dB)	Fit	Notes	Compare
Monacor SPA-110PA	61 -6	0.469 =	38 +1	4 =	96.3 -1	close	150 W vs 200 W: lower power handling	+
Radian CRS1030	65 -2	0.472 =	35.3 -1.7	5.5 +1.5	96.2 -1.1	close		+
LaVoce WSF102.00	65 -2	0.45 -0.02	34.03 -2.97	5.2 +1.2	97 -0.3	close		+
Faital PRO 10PR300	65 -2	0.48 +0.01	30.6 -6.4	4.92 +0.92	97 -0.3	close	16 Ω vs 8 Ω: amp load changes	+
Faital PRO 10FE400	60 -7	0.47 =	35.3 -1.7	5.42 +1.42	96 -1.3	close		+
Faital PRO 10PR310	65 -2	0.47 =	29 -8	4.92 +0.92	97 -0.3	close	16 Ω vs 8 Ω: amp load changes	+
Ciare CMI 250 ND	59 -8	0.496 +0.03	34 -3	4.5 +0.5	97.5 +0.2	close	4 Ω vs 8 Ω: amp load changes	+
LaVoce FBASS10-18	65 -2	0.43 -0.04	32.4 -4.6	4.5 +0.5	96 -1.3	close	150 W vs 200 W: lower power handling	+
Celestion BN10-300X	64.2 -2.8	0.432 -0.04	29.2 -7.8	4 =	96.9 -0.4	close		+
LaVoce FBASS10-18-8	62 -5	0.416 -0.05	35 -2	3.6 -0.4	96.1 -1.2	close	150 W vs 200 W: lower power handling · Xmax 3.6 mm < 4 mm: lower excursion-limited SPL	+

Compare the closest 3 against the K10-200E →

Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.

Used in enclosures (0)

No enclosure in the catalog uses this driver yet.