Celestion CF1025C
Thiele-Small parameters
| Nominal size | 10" |
|---|---|
| Impedance | 8 Ω |
| Fs | 54.8 Hz |
| Qts | 0.265 |
| Qes | 0.299 |
| Qms | 2.338 |
| Vas | 38.6 L |
| Sd | 346.4 cm² |
| Xmax | 2.5 mm |
| Re | 5.15 Ω |
| Bl | 14.8 T·m |
| Mms | 36.7 g |
| Pe | 300 W |
| Sensitivity | 97.2 dB |
Alignment hint
| EBP | 183 · ported |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 6.3 L |
EBP > 100: favours a ported (bass-reflex) alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| RCF MB 10N251 | 55 +0.2 | 0.271 +0.01 | 38.8 +0.2 | 4.6 +2.1 | 97.4 +0.2 | close | + | |
| Ciare PW252 | 55 +0.2 | 0.264 = | 43.4 +4.8 | 2.3 -0.2 | 97 -0.2 | close | 150 W vs 300 W: lower power handling · Xmax 2.3 mm < 2.5 mm: lower excursion-limited SPL | + |
| B&C 10 PS 26 (prodance) | 53.4 -1.4 | 0.267 = | 39.5 +0.9 | 5.4 +2.9 | 96.8 -0.4 | close | + | |
| SICA 10 F 2.5 CP | 52.4 -2.4 | 0.259 -0.01 | 41.4 +2.8 | 3.4 +0.9 | 96.8 -0.4 | close | 150 W vs 300 W: lower power handling | + |
| PHL Audio 3430 | 57 +2.2 | 0.271 +0.01 | 41 +2.4 | 4.2 +1.7 | 97.7 +0.5 | close | + | |
| Fane SOVEREIGN PRO 10M | 56 +1.2 | 0.27 +0.01 | 37 -1.6 | 2 -0.5 | 97.1 -0.1 | close | Xmax 2 mm < 2.5 mm: lower excursion-limited SPL | + |
| P.Audio E10-200S v2011 | 55.4 +0.6 | 0.272 +0.01 | 44.6 +6 | 4 +1.5 | 96.9 -0.3 | close | 200 W vs 300 W: lower power handling | + |
| SICA 10 K 3 PL 8 Ohms v2017 | 50.6 -4.2 | 0.256 -0.01 | 40 +1.4 | 4 +1.5 | 96.7 -0.5 | close | + | |
| PHL Audio 3001 | 57 +2.2 | 0.282 +0.02 | 35 -3.6 | 3.5 +1 | 97 -0.2 | close | 200 W vs 300 W: lower power handling | + |
| PHL Audio 3420 | 53 -1.8 | 0.256 -0.01 | 35 -3.6 | 4.3 +1.8 | 97.6 +0.4 | close | + |
Compare the closest 3 against the CF1025C →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.