Celestion BN15-400X
Thiele-Small parameters
| Nominal size | 15" |
|---|---|
| Impedance | 8 Ω |
| Fs | 44.9 Hz |
| Qts | 0.59 |
| Qes | 0.72 |
| Qms | 3.27 |
| Vas | 146.5 L |
| Sd | 854.9 cm² |
| Xmax | 4 mm |
| Re | 5.34 Ω |
| Bl | 13.6 T·m |
| Mms | 87.9 g |
| Pe | 400 W |
| Sensitivity | 96.4 dB |
Alignment hint
| EBP | 62 · flexible |
|---|---|
| Sealed Vb (Qtc ≈ 0.71) | ≈ 335.7 L |
EBP 50-100: works in either a sealed or ported alignment.
Rules of thumb from T/S parameters only. Verify against a real simulation before cutting wood.
Substitute candidates
| Driver | Fs (Hz) | Qts | Vas (L) | Xmax (mm) | Sens (dB) | Fit | Notes | Compare |
|---|---|---|---|---|---|---|---|---|
| Celestion BN15-300X | 45.9 +1 | 0.603 +0.01 | 153.4 +6.9 | 4 = | 96.7 +0.3 | close | 300 W vs 400 W: lower power handling | + |
| SB Audience BIANCO-15MW200 | 44 -0.9 | 0.586 = | 153 +6.5 | 5.2 +1.2 | 96 -0.4 | close | 200 W vs 400 W: lower power handling | + |
| SICA 15 BS 2.5 PL | 44 -0.9 | 0.552 -0.04 | 160 +13.5 | 4 = | 97.5 +1.1 | close | 250 W vs 400 W: lower power handling | + |
| LaVoce WSF152.50 | 46 +1.1 | 0.505 -0.08 | 137 -9.5 | 4.7 +0.7 | 97.3 +0.9 | close | 250 W vs 400 W: lower power handling | + |
| Faital PRO 15FH520 | 42 -2.9 | 0.62 +0.03 | 134.2 -12.3 | 9 +5 | 97 +0.6 | close | 16 Ω vs 8 Ω: amp load changes | + |
| Celestion BL15-150 | 49 +4.1 | 0.593 = | 179.8 +33.3 | 4.3 +0.3 | 98.4 +2 | close | 150 W vs 400 W: lower power handling | + |
| JB Systems PWX15-300 | 40.1 -4.8 | 0.552 -0.04 | 169.9 +23.4 | 5 +1 | 96 -0.4 | close | 300 W vs 400 W: lower power handling | + |
| DAP Audio AB-15 | 46.7 +1.8 | 0.546 -0.04 | 122.3 -24.2 | 5.5 +1.5 | 95.4 -1 | close | + | |
| Eminence DELTA 15 LF | 41 -3.9 | 0.584 -0.01 | 186.1 +39.6 | 6 +2 | 96 -0.4 | close | + | |
| Fane SOVEREIGN 15-250 | 43 -1.9 | 0.728 +0.14 | 144 -2.5 | 4.4 +0.4 | 94.6 -1.8 | close | 250 W vs 400 W: lower power handling | + |
Compare the closest 3 against the BN15-400X →
Ranked on parameter similarity only (Qts, Fs, Vas, Xmax, sensitivity). Same nominal size required. A hint, not a simulation, model the swap before cutting or buying.
Used in enclosures (0)
No enclosure in the catalog uses this driver yet.